The PlantNappy® is a practical solution to current spill prevention products, allowing fuels and oils to be absorbed into the base and contain the spillage while allowing clean water to escape.
What’s more is that the PlantNappy® requires no assembly or lengthy training and is ready to offer protection out of the bag.
Storage of Fuel Cans
Refuelling Power Tools
Small Water Pumps
Protection when carrying out minor equipment repairs
Catchment area when refuelling
Small to medium equipment machinery
Medium to large generators
PlantNappy® Sizing Guide
External dimensions – 500 x 685mm (19.5”x26.5”)
Internal dimensions – 460 x 645mm (18.1”x25.39”)
Absorbency – 2Ltr (0.5 US gal)
Weight – 1Kg (2.2lb)
External dimensions – 1000 x 685mm (39.3”x26.9”)
Internal dimensions – 960 x 645mm (37.79”x25.39”)
Absorbency – 4.5Ltr (1.18 US Gal)
Weight – 2Kg (4.4lb)
External dimensions – 2000 x 1370mm (78.74”x53.9”)
Internal dimensions – 1960 x 1330mm (77.1”x52.3”)
Absorbency – 16Ltr (4.2 US Gal)
Weight – 5Kg (11lb)
The base layer is a non permeable layer that acts as a barrier between contaminated liquid and the ground. Because of this there is zero chance of migration or transfer of fluids to the ground below. The materials have been carefully chosen to offer high puncture resistance to accommodate the harshest of environments.
The design of the side wall has been developed to allow rainfall to escape at a considerable rate but also filter out any oil residue that may have been picked up by water, the water leaving the Nappy has been proven to contain less than 3.4ppm of contaminates. The side walls shape regaining perimeter means that heavy equipment and machinery can be rolled onto the PlantNappy® without compromising the side wall’s function.
The base offers rapid absorption of oils and fuels, but more importantly traps the oil in one place. The special materials have a high oil to weight ratio but ensures that water is repelled and directed to the side wall for filtering.
The base also features a cushioned, non slip surface which prevents machinery moving due to vibrating parts.
Liners offer the same features as the internal base but with one key difference, the liner is removable. Should you find yourself with a frequent drip or spill, the liner would absorb oils and fuels until it reaches it’s capacity, at this point you could remove the liner and clean out the oil or replace the liner with a new one to effectively utilise the lifespan of the PlantNappy®.
PVC Coated mesh
Oil and chemical resistant
High tenstile strength
Temperature resistance -20°C (-4°F) to 107°C (224.6°F)
Melt point 157°C (314°F)
Auto memory shape
PVC coated polyester fabric
High tenstile strength and puncture resistant
Temperature resistance -15°C (5°F) to 107°C (224.6°F)