Note: Full sheets are 4' x 4' and half sheets are 2' x 4', with the exception of 02-00236 which are furnished in 61" x 61" full sheets.
Quality Birch Aircraft grade plywood produced to AB/B grade on all thicknesses.
Finnish birch plywood is furnished in 48" x 48" sheets, depending on current availability. Prices fluctuate with changes in sheet sizes. Full sheets require truck shipment unless cut in half for UPS.
Color may vary.
2' x 4' Plywood are cut with grain.
If cross cut required, specify at time of order
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
FINNISH BIRCH 24"X48"X0.4MM
This thin birch ply is very well made and works extremely well for its purpose in making my product. There is no reasonable substitute or equivalent in its place here.
FINNISH BIRCH 24"X48"X0.4MM
Arrived intact and as advertised
Very good quality 👌
Very nice wood, no bad spots and shipped and delivered quick. 2nd order placed and WILL use them again soon.
Plywood was shipped quickly and well packaged.
Top quality product! I was also very pleased with the fast shipping and great care taken of packaging the product! I will definitely be ordering in the near future.
Im sculpting with 3mm and 4mm Finnish ply. It is far superior to anything else I have used. I shape it down to thin sections and it holds up! The shipping is quick, packaging excellent, and I am very satisfied. You get what you pay for. This is the best.
plywood showed up in excellent shape (due to their packaging) and was exactly what I ordered. I will definitely be making future orders from this company. extremely satisfied.
The product arrived in perfect condition, and the service was excellent, couldnt be happier! Thanks!
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The 6 mm birch is 12 plies. For the plies info of other sizes, please see the "Plies" column in the parts listing. 3rd column from left.
The weight of this sheet is approximately 0.60 lbs.
A half sheet of this plywood is 2 ft x 4 ft, so in centimeters that is 60.96 cm x 121.92 cm.
Yes, this meets GL-2.
The 1.5 mm plywood has 3 plies. For the plies info of other sizes, please see the "Plies" column in the parts listing. 3rd column from left.
The weight per square foot is 0.92 lbs.
This will be approximately .11 lbs per sq. ft.
This is not a sealed, finished plywood. It is called Finnish Plywood because of where it is made and the specification if meets.
It can handle slight bends but tends to crack if not careful.
Yes, we can cut this down to reduce shipping costs. Use the special instructions box at checkout to request custom cuts.