Note: All sizes and types sold in 50 yard rolls
A layer of 2.7 oz. Dacron fabric strips or tape laminated into a layup as if it were an extra ply of glass. The peel coat wets out with epoxy like glass cloth and cures along with the rest of the layup. However, the Dacron does not adhere structurally to the glass and when peeled away it leaves a surface ready for glass-to-glass bonding without sanding. Poly/Dacron blend is excellent as peel ply for composite lay-ups.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Good product to use as last step in fiberglass lay up.
SURFACE TAPE DACRON 4" SMOOTH
Used this peel ply in the build of a cedar strip canoe. Created a perfect fillet between the hull and keel.
Ordered a roll of 4 peel ply for a current build. This product is the real deal, works perfectly on seams so less work finishing. Great product, easy on line order, prompt delivery, excellent price.
The 3-inch wide Peel Ply with pinked edges peels up nicely after cure without leaving behind stray strings.
Works great and is a lot easier than making it myself from sheets of peel-ply. The pinked edges are also great for minimizing stray nylon fibers.
YAY! The 1 wide tape 09-15000 arrived with FINISHED EDGES! No more frayed edge threads stuck in the epoxy when used as peel-ply.
Great job supplying Peel Ply for my, now 42 year LongEZ N724DT project. I have relied on Aircraft Spruce for the entire project and have never been disappointed with their service and support. See www.OnWingsofGlass.com for a history of my never ending project and long deferred dream of flying my own aircraft. When I take to the wild blue yonder on my wings of glass, Ill forever shake the bonds of earth and soar with the Eagles!
School uses it for Peel Ply on Composite project. Leaves a nice smooth finish for overlap.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Pinked refers to the edge of the tape. There are straight edges and pinked edges. Pinked is a teeth-like pattern on the edge of the tape. "Pinked edges are used to increase the amount of surface that can actually adhere to the aircraft fabric when the tape is cemented in place. The actual edge area that will be cemented in place increases by over 41% when pinked edge tape is used versus straight edge tape." (credit: Ron Alexander) When working with composites, straight edge tape is primarily used. In fabric aircraft covering, pinked and straight tapes are used.
Per Vendor: We don't have one for this product because it is 100% polyester with no dye or finish (it is scoured to remove 99%+ of the processing chemicals used to weave it), but I will see what I can put together.
Yes, it is a polyester type like finishing tape used in fabric covering. It is used on experimental aircraft.
Yes, each size listed is sold in 50 yard rolls.
It is basically the 102 Dacron cut into a strip.