|Specially ground point, 60° included tip angle, 0°rake angle, shoulder relieved, for drilling acrylic sheet to prevent fractures, chipping or cracking.|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
ACRYLIC DRILL 5/32"
As Advertised - perfect for the task.
The drill made the job of drilling acrylic plexiglass much easier. Very glad we purchased this item.
Tangee always provides excellent service. The drill bits work well.
Worked perfectly. I used a 1/8 bit to pierce the acrylic then stepped up with standard bits, which seems to work fine. Would suggest not drilling thru with the larger bits bit drilling part-way thru and then re-drilling from the other side. This should prevent breakout. This seems to be pretty fresh acrylic and didnt have any tendency to shatter.
Love this bit --- cuts thru plexiglas like a hot knife thru soft butter. No burrs. Very clean. Only downside is that they dont come in gauge sizes
I used the 1/8 and 5/32 bits to fabricate and drape form a two piece windshield. They worked great, along with Bosch T102BF plexiglass cutting jig saw blades. Took the terror out of working with acrylic sheet.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes they will.