See Spruce PN: 11-04000, 11-04002, 11-04003 in the
"Accessories" tab for additional Bezels.
FiberLites, by Superior Panel Technology, offer an innovative instrument lighting system that uses fiber optics to evenly illuminate aircraft instruments with easily accessible, long lasting, LED light sources.
Select up to 8 of any Bezel combination of 3-1/8”, **3-1/8” with cut-out (DG,VSI,ALT) and 2-1/4” instruments light bezels.
**The FL318CO has a cut-out in one corner. Use this for directional gyros, altimeters, vertical speed indicators and other Instruments with corner knobs. Use the standard FL318 for the attitude indicator.
Fiber-optics are affixed to specially designed bezels that are sandwiched between the instrument and the panel for appearance of an internally lighted instrument. There are 5 advantages of using FiberLites over other lighting devices...
2. The LEDs are very long lasting, however, if they ever do need to be replaced, they are easily replaced without having to remove any instruments.
3. FiberLites provide even 360 degree lighting around the instrument.
4. The instrument is not altered in any way.
5. FiberLites can be used to backlite placards
(see FiberLite back lighting kits #11-08561 and 11-08562).
You will also find a copy of the approved STC and the installation instructions in the document section.
The Superior Panel Technology’s Pulse-Width Modulation Dimmer is recommended for dimming the FiberLite LEDs. The dimmer is discounted when purchased as part of the FiberLite package.
Another great complement to this product is the BattPack battery backup system
P/N 11-06595 (14V) and 11-06596 (28V) which allows up to 1 hour of instrument lighting in the event of an electrical failure.
It is rare that I find a product so good that I actually review it online. I purchased a full set of these at a function last year. Installed them in a Beechcraft Musketeer that I just updated for IFR/ADS-B. They turned out so well, my hangar neighbor bought a set through Aircraft Spruce and installed them in his Cessna 172. Their look and function is simply Amazing. I bought the 2 circuit solid state dimmer upgrade and you can achieve the Perfect level of desired brightness from very dim to very bright! Equally important is their support. Ken is a wealth of information and he gladly talked to us giving advice, install tips and sharing his experiences and options. Superior Panel deserves this two thumbs up!
I installed this instrument lighting system into my 172RG and find it works well. Solowings in Tauranga New Zealand did the install with the instructions provided and the feedback was that the installation was done without a problem. The dimmer switch works well. After doing the load testing on the power required the draw was so low the battery backup system was not required. A great addition to the cockpit
Had fiberlites installed by JPS Aviation in Monroe LA last spring in my 182RG. 100 hours later, still love the outcome. Better than traditional ring lights but significantly less cost. Definitely far superior to the stock post lights. The installer, who hadnâ€™t installed them before, said the support was great. Very happy
Really disappointed in these. Just redid my M20E panel and these were installed. From my vantage point, because of the extra recess of these rings, the top 1/6 of all my guages are obstructed from the field of view. Id take a refund of the parts and labor if I could. Surely would not buy these again.
Great product lit up my panel. However make sure not to try to shorten the fiber-optic cables it will turn into a mess but that was my own fault. I tried both these and Nulite. These were by far better
Per the supplier: “Yes, FiberLites are FAA approved for certified aircraft. Look in the document section for the Approved Make and Model List. If your aircraft is not in the list then you would need a 337. You can request copies of approved 337s by contacting the manufacturer at firstname.lastname@example.org. You will also find a copy of the approved STC, and the installation instructions in the document section”
White and green are the only available colors.
Yes, the instruction manual can be found under the documents tab for this part.
Per the manufacturer, LEDs are dimmable with the use of a solid state dimmer. A standard rheostat will not adequately dim LEDs.
Each package comes with your selection of 8 bezels, each of which has an attached 27" fiber optic tail, and three LED light sources.