|Panel Post Light. Compact design, just 3/4" x 1/2" (6mm shaft diameter). 2 super-bright LEDs. Ideal for panel lighting or map lighting.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
NEW PANEL POST LIGHT- 12VDC WHITE
Got it to improve the dashlights on my wifes 2004 Forester...she can noe see the instrument cluster jes fine..especially in daylight. Beats tearing the dash apart and installing brighter replacement bulbs that dont work half the time! Thanks!
NEW PANEL POST LIGHT- 12VDC RED
The 12volt LED panel light arrived in minimum time. I purchased for a simulator panel, the quality is excellent. Brightness is adjustable, starting at 5volts through 12volts.
Works as advertised
years in the industry and have always hated not just the price of post lames on the market but have not been impressed with old school lamps . this idem has changed my view about using post lambs in my projects. see if for yourself at my wings over Wyoming Facebook page or my forgotten transport of America Facebook page. I will continue to us this product in my business
Installed it on my golf cart dash, works great.
These post lights are affordable however they do not fit into standard instrument cases. It will require drilling and additional larger hole . The color and illumination is good and if you can drill another hole in the panel they will work great.
Definitely bright compared to the original post lights these replaced & do very well lighting up the panel with minimal number of lights. Gave it 3 stars since it does not fit in instrument screw holes & required new holes on the panel to be mounted without drilling the instrument attaching holes
The rubber sealant on the LED basically disintegrated after a year and comes off in tiny pieces. Wouldnt recommend these at all.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This light is not FAA TSO'd or STC'd.
The current draw for the 12V light is .05ma the 24V light draws .06ma
Yes, the panel post lights are dimmable.
The threads are 1/4" the light itself is 1/2".
It depends on the instrument panel but in general, these post lights can illuminate from 2 to 4 instruments. (meaning: Two on the top row and the two below them)
Yes, they are. (Within limits).
They dim OK with regular incandescent dimmers - not as well as with a PWM (pulse wave modulation) dimmer but they work acceptably well with older types.
The Panel Post lights have a 120 degree pattern.
They will work with incandescent dimmers but not as well. A PWM dimmer would be a better option. They are not approved for certified aircraft.
24 gauge wire