• Application: Refrigeration trucks, marine generator sets, diesel filtration systems, industrial applications, and other diesel lift applications. These pumps are rated for diesel fuel, gasoline, blended alcohol fuels, and fuel additives. • Solid State Reliability: Proven on many original equipment applications No electrical contacts. No bearings or diaphragms to wear out or fatigue. Endurance life almost doubles that of our nearest competitor. • Easy to Install-Easy to Service: Two bolt mounting makes installations easy. Nothing to adjust. The pump is self-priming to 120 inches (3.0 m). Vertical mounting is preferred to assure maintenance of rated pressures. The transparent housing allows for visual capability to monitor the cleanliness of the stainless steel filter. • Eliminates Vapor Lock: When properly installed on most vehicles a constant, smooth, dependable supply of fuel under pressure is assured in the hottest weather or in high altitudes. |
PN | Facet No. | Volts | PSI Max-Min | GPH | Fitting Size | Lift Min. Dry | Check Valve | Position Shut Off Valve |
---|---|---|---|---|---|---|---|---|
05-10884 | 40222 | 12 | 11.5-9.0 | 33 | 1/8-27 Int. | 120" | Y | N |
05-10886 | 40285 | 12 | 7.0-4.0 | 33 | 1/8-27 Int. | 120" | Y | N |
You cant go wrong with a Facet pump. Pump works great for my diesel truck application. Aircraft Spruce provides great service and fast shipping.
Worked exceptionally well in my application (an inboard boat). I wanted a pump that could pull through a fuel filter and water separator, as opposed to pushing through. It replaced a Carter P4594 that was noisy and unreliable.
Works as it should good price
it lifts.
Works good
Excellent pump. Fast service and delivery from A/C Spruce.
The pump was easy to install, and plumbed in and primed up easily. The only reason it didnt get 5 stars is this: the pump came with a quick-connect type connector to plug into a mating connector-good idea. However, it did not include the mating connector. So, we were forced to cut off the pretty connector, and use crimp-on splices in its place. For the price, it should have included both male and female ends of the quick connect, or, maybe Pilot shop should offer the other end, for a small fee. But, just the two wires would have worked for us.
Per the supplier: The filter is cleanable but we recommend you replace the O-Ring each time if you choose to clean the filter.
It has a positive and a negative attached.