|The 6" Spun Aluminum nose wheel with 5/8 bearings. Comes centered when using the MX o-ring standard wheel hub but can also be purchased with the MX offset hub (no o-ring with offset hub. Requires the use of a tube. The bearings are centered and rim halves are mounted from one side, creating a narrower wheel than the std. MX hub).Nose wheels comes complete with nuts, bolts, washers, valve stem, o-rings if required and the MX hub. Can be ran with or without tube. May also be used as main wheels. Wheel width options 3.5" (1.75" rim & 1.75" rim), 4" (2"rim & 2"rim), 5" (2.5"rim & 2.5"rim), and 6" (2.5" rim & 3.5 rim when used as wide main wheel)|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.