|Nylon II Tube 1/4"|
|Nylon II Tube 1/8"|
|Union Brass Fitting 1/4"|
|T-Fitting, 1/4" Compression|
|Compression Fitting For 1/8" OD Tube|
|Straight 1/8" NPT - 1/4" Compression|
|Straight 1/8" NPT - 1/8" Compression|
|---||Straight Fitting 1/16"|
|Brass Elbow, 90° 1/8" NPT - 1/4" Compression|
|Brass Elbow, 90° 1/8" NPT - 1/8" Compression|
|1/8" Ferrule and Nut|
|1/4" Ferrule and Nut|
|Matco brake tubes, brass fittings, straight fittings, elbow fittings, T-fittings, ferrules, & nuts.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
TUBE NYLON II .125
Good product and servise
1/8" FERRULE AND NUT MSC161P
Easy to use and they work great.
STR FITTING 1/8" NPT-1/4" COMP
Got here quick and complete
Gotta have these just in case of a seeping brake line. Finger tight and one turn of the wrench and you’re back in business.
Great fittings for aircraft brake lines. Makes connections very easy.
Bought the 06-01139 (90 degree) and it works fantastic with my grove brakes to connect the caliper to the nylon brake line. quality product and cheap!
Hi quality parts that fit well. The inner sleeve holds line nicely
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The ID of this would be .073". Wall thickness would be .026". Bursting pressure of 2,100 PSI, working pressure of 600 PSI. The manufacture would be Parker.
The tubing listed on this page is priced and sold per foot.
Yes they come as shown in the photo.
No they will be for 1/4" tubing.
This will have a burst pressure of 1700 psi. The ID is 0.215" while the wall thickness is 0.035".