|Female / Male||Part No.|
|C1210-4||-12 / -10||04-02099|
Light weight aluminum adapters by Phenix Industries are designed for leak-proof sealing with any manufacturers hose ends.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
excellent and saved the day.
While it doesn’t state so, this is a 2-piece “swivel” fitting so don’t be surprised. Talking to manufacturer, the two-piece swivel fitting is required for aviation applications because the male side is allowed to swivel (or rotate) after locking into the male fitting you have inserted into female side. The female side then is allowed to turn around the male fitting you have inserted. If it wasn’t two part swivel, the mating surfaces would score each other as you tightened down, increasing risk of leak. So two piece swivel, C431-4, is what you want for aviation.
Very nice item! Great quality and very use full in changing to a different size. I have used 4 on my build
Ordered 2 of these. Same part number on package but they were different parts. The shape of the fittings were different and one had an O-ring. They were functionally the same but obviously not...
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This does not require an O-Ring. When you screw this together, it should be able to seal itself just fine.
Per the listed chart, that is correct. C431-4 has a -4 female, and -3 male thread.
Yes, our part number 04-02101.