Nuvite engineers have formulated a system of polishes to meet the needs for almost any metal and paint polishing project. New metal to antique, the formulations in the NuShine II Polishing System will give superior definition, highlights, imagery, clarity, and will retain the finish longer than normal polishes. Nuvite’s NuShine II graded polishes use high technology materials with programmed abrasive characteristics and are blended with superior carriers to offer the ability to produce cutting action when needed, yet offer micron-level finishing in the finer grades that produces highest reflectance and image excellence. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Works as advertised. I great first step for what I had going on.
Nushine II Grade F7 1/4Lb
Works well to remove exhaust tarnish on stainless exhaust (power flow).
Nushine II Grade F7 1/4Lb
Great product!
Nushine II Grade F7 1/4Lb
Did a fine job on my 1961 Airstream
Fast delivery with certs and full shelf life!
Works great
Speedy service
Great!
delivered on time. I think delivery cost was a bit high
Worked well, very fast service. Received within a week of ordering.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, per the MSDS sheet, it lists the following: Silica (SiO2)(Respirable Dust)* - OSHA PEL 0.1mg/M3 - ACGIH TLV 0.01mg/M3 - % (Optional) 15. Note: SiO2 is embodied in product, thus restricting respirable dust conditions.
Please request c of c at time of order for certificate with included expire date for the can. It can also be looked up after the order via the manufacturing lot #.
Yes the Nushine products can be used on Alum., Brass, Copper, Steel, etc.