EVERYTHING FOR AIRPLANES SINCE 1965 | 877-4-SPRUCE

AKZO NOBEL EPOXY PRIMER 2GAL

$439.00/Each
Part# 09-24735
MFR Model# 463-12-8/CA-116
DescriptionPN
2 Part Fluid Resistant Epoxy Primer:
Base Component A 463-12-8 (1gl.),
Curing Solution Component B CA-116 (1gl.)
09-24735

Overview

AKZO interior epoxy primer #463.12-8 is a chemically cured 2-component epoxy primer designed to provide maximum protection from various chemicals, hydraulic fluids, aviation fuels, and corrosive causing media. Drying time to touch is 15 minutes and to recoat is 1-24 hours. Shelf life: 2yrs,Color: Green. Used extensively in military and aerospace applications and popular with aircraft builders. Uses 1 gal. of primer & 1 gal. of catalyst.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Documents

Reviews

The cans arrived badly damaged and dented. There was a leak in 1 of the cans also. However, the product itself is nothing short of amazing. The product is extremely durable and sprays on easily with the cheapest Harbor Freight sprayer they sell. Contains VOCs so be sure to take safety precautions when applying.

Robert S Verified Purchase

AKZO NOBEL EPOXY PRIMER 2GAL

September 16, 2022

The best adhesion and cure finish of any product on the market. Doesnt release from aluminum when chipped or scraped. Excellent sealing qualities. Perfect factory color appearance.

Shepard, G Verified Purchase

AKZO NOBEL EPOXY PRIMER 2GAL

September 2, 2022

Great Primer. Spray and 5 minutes its dry enough to flip the part. Durable. Easy to use, very strong smell, so use in ventilated area.

Warren J Verified Purchase

AKZO NOBEL EPOXY PRIMER 2GAL

June 17, 2022

The AKZO seems to work very well, its tough as hell!

Ray A Verified Purchase

AKZO NOBEL EPOXY PRIMER 2GAL

August 24, 2021

This stuff is great. It sticks to the surface. Its a hard protective coating. It scotch brites smooth. As long as UPS doesnt damage it coming to your house, you will love this stuff.

Todd J
September 30, 2020

Product is amazing. Once cured it cannot be scratched or scraped off. Solvent resistant as I soaked my gun tips in lacquer thinner for a week and still had to scrub off dried primer (my fault as I should have cleaned the gun immediately) Original order damaged my UPS and received an email advising product was thrown away and shipper had been notified. Contacted customer service and Caroline looked up my order and immediately sent a replacement. Excellent customer service after the Sale!

Scott
October 12, 2019

I wouldn’t use anything else. 18 years ago I used this on my RV6 and on the exterior wet sanded with 600 grit and then PPG Concept top coats. That RV still looks great today. Now I’m using on my Xenos project. This is durable stuff.

R C
December 1, 2018

This stuff is fantastic. I used PREKOTE to treat the surface and then spray the AkzoNobel. Easy to spray and mix. Drys hard as rock. Does not scratch or flake off.

John S
December 1, 2014

Love this stuff but having to buy a gallon to get a quart is expensive and wasteful. So, I buy 8 quart containers and after thorough mixing of each gallon, I pour the contents into the quart cans and reseal with the hope that I can use it all up before it dries up! I was disappointed that the color was more of an olive drab instead of the bright green in the aerosol can, however.

Larry H
March 23, 2020

This product has doubled in price in the past year. But we had to bite the bullet to complete priming of an RV airframe. Unfortunately the same thing happened to an order placed last year, which is that it was destroyed in transit by UPS. The solution this time was to just fly the 700nm round trip to Corona to pick it up at the counter and bring it back in perfect condition. It is a wonderfully durable epoxy primer, but shipping it doesnt seem to work based on our experience. Other vendors put the two gallon set in a double walled box with clips on the tops of the cans, which seems to survive shipping better.

Daniel M Verified Purchase

AKZO NOBEL EPOXY PRIMER 2GAL

September 27, 2022

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Does this primer come with the activator?

Yes, this comes with an activator.

Q: What do you recommend to clean the spray gun with after spraying this?

You can use MEK for cleaning the gun.

Q: Regarding the AKZO FAST DRYING INTERIOR EPOXY PRIMER: Is the thinner required for spray application?

It is not required, but use as needed for the spray equipment, but no more than 25%.

Q: What surface preparation must be done to new bare aluminum before applying the Akzo Fast Drying Interior Epoxy Primer?

Take a look at our Alumiprep P/N#'s 09-01621 & 09-01620. There are tech data sheets listed on the web pages. This will give you the detailed information you need to prep your aluminum.

Q: Do you have an example of the color of this primer? Does it have an opaque flat finish?

We do not have a color chart for this primer. The tech data sheet calls it DN 9295 Green. It is a smooth finish, but looks like a flat milky light green color.

Q: What is the shelf life of this Akzo fast drying primer product?

24 month shelf life.

Q: Can you thin with Acetone?

Thinning is not necessary....but if customer wants to thin they can use any epoxy reducer...Thinning beyond .25% not recommended

Q: Can this be brushed on?

The data sheet only mentions spraying it as the application process.

View in Catalog

View Image View in Catalog