EVERYTHING FOR PLANES AND PILOTS SINCE 1965 | 877-4-SPRUCE

MCI MD200-706 3" CDI GLIDESLOPE 28V LAMP TRAY

$2583.00/Each
Part# 10-06014
MFR Model# MD200-706
Model NumberDescriptionVoltagePart Number
MD200-7063-inch, L/R, Glideslope with annunciators24V Light Tray10-06014

Overview

The MD200 Series sets the standard for navigation instruments that are significantly more reliable, longer lasting and easier to read. Thousands have been sold by Garmin with the popular GNS 430/530 systems and the GTN Series touchscreen navigators. The MD200 Series is the preferred replacement for the Collins Micro Line IND 350 Series and replaces the BendixKing KI206.

Built-in annunciators are easy to view and save hundreds of dollars on most installations. These CDIs feature new-generation rectilinear meter movements for more accurate readings, plus a course selector and resolver output.

The MD200 Series can be configured for 14V or 28V installations.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Features

  • Fits standard 3 1/8” panel cutout
  • All-metal construction with stainless steel ball bearings in critical areas
  • Deviation bars/pointers hide from view when invalid
  • LED annunciations for NAV, GPS, VLOC and To/From indication
  • True OBS course resolver out
  • Compatible with WAAS GPS receivers
  • Pin-for-pin replacement for previous MD200 models
  • High-quality d-sub connectors included with gold-plated pins
  • FAA TSO and ETSO certified for use with all GPS and VOR systems
  • Designed and built in Wichita, Kansas, USA
  • One-year limited warranty put

Specifications

Voltage Input
12 – 32 VDC 

Current Input
0.2 amps max 

Lighting
5V, 14V, or 28V automatic photocell dimming of annunicators 

Cutout
Standard 3 1/8” round 

Weight
1.3 lbs 

Temperature
–55°C to +70°C (–67°F to +158°F) 

Altitude
0 to 55,000 ft 

Humidity
95% non-condensing 

Vibration
DO-160B, Cat. M and N 

Certification
FAA TSO certified to C34e, C36e, C40c
EASA ETSO certfied to C34e, C36e, 2C40c
RTCA DO-1606 qualified 

Mounting
Panel, rear mount 

Connector(s)
25-pin male D-Subminiature
9-pin male D-Subminiature 

Mating Connector(s)
25-pin female D-Subminiature (included)
  • Frequently Purchased With
  • Customers Also Viewed

Reviews

Wonderful unit for bridging GPS with VOR/ILS/GS. Essentially same unit as Garmin GI106B without the added Garmin tax.

Vernon D Verified Purchase

MCI MD200-706 3" CDI GLIDESLOPE 28V LAMP TRAY

November 3, 2021

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Is this CDI compatible with Garmin GNC 355?

Per the Garmin installation manual Rev 3, this is not a compatible unit.

Q: Is this Mid Continent CDI unit compatible with Garmin GNX 375?

No, it not compatible with the Garmin GNX 375.

Q: Its compatible with King KX155 with glidslope 14 volt?

Per MCI, this works with the KX155A or KX165, not the straight KX155. To make it compatible with the KX155, a KN72 can be installed.

View in Catalog

View Image View in Catalog