Attention: Avdel has changed the mandrel design for some of their Cherry "N" Rivets. The change has not effected the strength of the rivet.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
These are superior rivets in the economy world. Ive used cherry max rivets in the past which are the best but pricey. These give excellent holding power at a much reduced cost
CHERRY Q POP RIVET AAPQ-44
finally a good quality rivet
Fast service, and the item I needed. Thank you for keeping stock up, especially in these interesting times.
It was delivered reasonably quick. Very much appreciated.
Worked as advertised
Comon guys... Their S/S Cherry Rivets, and they work as advertised.
These rivets were quite riveting.
Very good rivet. I was concerned tensile strength was too high for thin fiberglass cowling, but I was wrong. With 120 degree, there is still adequate thickness in countersink and install is flawless.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, the shear and tensile strength information can be found in the "Overview" tab of this web page. Rivet CCP-42 is a Cherry N Rivet with 1/8" diameter. The shear strength of this rivet is 450 lbs and the tensile strength is 600 lbs.
You will need a general pop rivet gun / tool. Part number 12-00178 for example.
Yes, a keyword search for CR3213 on our website will bring the correct page to the search results.
Yes, these are priced and sold per rivet.
The grip is the material thickness that the rivet can attach.