|The Mini Tubing Cutter performs where conventional tubing cutters simply cannot fit. With a 1-1/2” swing radius, the Mini Cutter is ideal for limited-space applications such as refrigerator and air conditioning repair. The adjustable jaws accept tubing sizes from 1/8" to 7/8” in diameter and up to 1/8" in wall thickness. Gold Standard, tempered cutting wheels are capable of cutting through copper, aluminum, brass and thin-wall stainless steel.|
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Let me be clear, this cutter is doing it’s job. However, I purchased it specifically for cutting 3/16” (inside it’s advertised cutting range) 3003-O tubing, and the frame of the cutter badly scored my tubing. I tried flipping the tool around, cutting more slowly, using lubrication - there was no escaping the deep groove cut into my delicate tubing by the cutter frame. Fortunately, the frame is soft aluminum, and I was able to file the edges down so that they no longer stood proud above the roller assembly. It was a cheap tool, and it cuts, so it gets three stars. But it required some significant modification to work properly. Buyer beware.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.