|Yoke, Squeezer, 5-5/8" Deep, 1-3/16" High. Fits ATS-114C, Chicago Pneumatic 214C, and 0214C series squeezers.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This yoke is a good alternative to the special bucking bar recommended in the RV-14 construction manual. The throat is just deep enough to reach the rivet when placed perpendicular to the trailing edge. In my hands, better control was obtained with a foot valve allowing two handed use. RV-14A #140593 at EAA buildres log.
I’ve used the 4 inch one and I think the 6 inch one will help out in a lot more places
SQUEEZER YOKE 5-5/8"
The one shipped doesnt look like the one advertised. It has a fat nose that one needs to grind down in order to get between the HS spar. Once that is done it works great. There is a lot of flex but that is to be expected at that distance. The rivet sets basically touch when exercising the squeezer empty but when squeezing a rivet, the flex creates the correct distance.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes this fits ATS-114C, Chicago Pneumatic 214C, and 0214C series squeezers.
This yoke fits ATS-114C, Chicago Pneumatic 214C, and 0214C series squeezers.
Yes it will fit.