Measures just 2.25"x1.38"x 2.75".
Compact and work well so far, isolate cabin noise from coming back in the headset.
SKYCOM 200 2 PLACE INTERCOM
Not useable in high noise enviroments
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, with the Icom headset adapter that comes in the box for the A24 & A6 you can connect the radio to the Skycom 200E intercom.
This portable intercom is designed to be used with a 9V battery and does not have power and ground lines or the ability to support a 12 or 24 volt system.
Yes you can use this for the A110 but you will need two Icom parts for this to work. First is the headset adapter for the A110 (OPC 871) 11-06198. Second is the Icom PTT 11-09131.
The Skycom 200E - 2 Place Portable Intercom will work with the ICOM IC-A22 as long as you use it in conjunction the ICOM OPC-449 adapter cable.
The skycom 200E 2-place portable intercom will work with the Yaesu FTA-310 if used with the CT-96 headset cable and a PTT switch such as part #11-12100. The cable length is 4.5 ft.
The Skycom 200E 2-place portable intercom will work with the Yaesu FTA-230 when used with the included CT-96 headset cable and a PTT switch such as part #11-12100.
The Skycom 200E allows you to plug in two set of headsets in the place of one. The two headsets on the receiving end will be capable of listening and speaking through just as one headset would without the intercom in place.
No, this adapter must be purchased separately. It is part number 11-18537.
To use the Skycom 200E with the ICOM IC-A14, the Icom headset adapter part number 11-18537 must be used.
Yes, as long as it has the 9V battery inserted, you can plug in your headset into the Skycom 200E without plugging it into the aircraft or handheld radio.