Thumbs 1
Thumbs 1
Thumbs 1


Select Size:
12 Oz Bottle 16 Oz Bottle 1 Gallon
Add to Wishlist


RejeX® is a proprietary thin film polymer coating technology designed to provide a high-gloss / ultra-high-release surface. RejeX is commonly used as a paint sealant providing a better performing alternative to wax-type products for owners who want to maximize protection and shine on vehicles of all sorts, including aircraft, cars, motorcycles, boats and RVs.

RejeX has a higher refractive index than any wax, so it produces richer, deeper looking colors. The product dries water clear, and unlike wax-based products, never yellows. This highly durable coating produces a deep, lustrous shine that outlasts other products by months.

This very thin film, only tenths of a micron thick, reduces adhesion of all common contaminants such as road grime, exhaust, oil, bug splats, bird droppings, brake dust, tree sap, pollen, tar and grease. RejeX also provides exceptional UV protection. it is even effective against the dreaded love bugs!

RejeX can also be applied to windshields (glass, Lexan, acrylic, etc.) to repel rain and make bugs splats easier to remove.

RejeX has recently been awarded the GSA National Stock Number 8030-01-593-8208 for use on all NATO destroyers and cruisers armed with the AEGIS defense system.

RejeX contains none of the free silicone oils found in some other polymer products that are known to contaminate paint and cause issues when repainting.


Application Notes

  • As RejeX cures, the polymers cross-link into a crystal-clear, flexible, chemical- and contaminant-resistant film. It is very important to allow RejeX to cure for 8-12 hours after the haze has been wiped off. If the coating is exposed to contamination such as oil, fuel, soot, hard water, cleaners, etc. before it has cured, the contaminants may interfere with the integrity of the film, affecting its visual characteristics and release properties.
  • RejeX SHOULD NOT be used on porous surfaces, highly textured surfaces (such as the plastic/rubber trim on some SUVs), oxidized painted surfaces or oxidized (chalky) gelcoat/fiberglass. If a painted / gelcoat surface is worn/oxidized, polish to remove "dead" oxidized paint and gel coat / fiberglass before applying RejeX.

    Buffers work just fine for applying / removing RejeX. If you use a buffer, do not apply RejeX with pressure, simply use the buffer to spread out (and/or wipe off) the product.

  • RejeX can be applied in multiple coats – allowing at least 4 hours curing time between coats – for greater depth of gloss and extended longevity.

  • RejeX can be used over existing wax, however, the duration of protection will be reduced as the softer underlying wax degrades comparatively quickly. Waxes can be applied over RejeX, however many of the benefits of RejeX may be negated and the wax finish will typically not last very long due to adhesion limitations. It should also be noted that many waxes (particularly those products described as "restorer waxes") and all polishes contain abrasives, which can strip the thin RejeX film.

  • If a RejeX-treated surface needs repainting, normal paint preparation is all that’s required. Abrasive cleaners, polishes or rubbing compounds will remove the RejeX film.


  1. 1.Shake well.
  2. 2.Apply to a clean, dry surface that is cool to the touch. Avoid appling in direct sunlight when ambient temperatures are greater than 85° F. On hot days, we recommend RejeXing in the shade, early morning or in the afternoon. For larger vehicles such as RVs, busses and yachts, a good trick for dealing with hot days is to apply RejeX to the top and western facing side in the morning and the eastern facing side in the afternoon, so that you're always working on the shady side.
  3. 3. After RejeX dries to a haze (about 10-20 minutes), wipe off with a clean cloth. Unlike waxes that require strenuous rubbing or buffing to remove, RejeX should wipe off easily.
  4. 4.Allow RejeX to cure for 8-12 hours out of the elements. The higher the humidity, the faster RejeX cures.
  5. 5.While it is not uncommon for a RejeX treatment to last well over a year, for optimum protection, reapply every 6 months or as needed (e.g. when bugs and other contaminants begin sticking to leading edges of wings and front bumpers, when brake dust begins sticking more tenaciously to wheels, etc.).


As advertised: excellent product!

August 12, 2020

I have a tuned bmw 335 diesel that leaves the back end of a bright white car BLACK. It was so bad, that wiping it off actually left deep scratch marks. To remove the soot, required polish compound and a lot of elbow grease. I had tried various waxes (bmw hardwax, autoglym, carnauba). Regardless the number of coats, soap and water could not remove the soot...until NOW. I read and searched online for a product, decided to spin the dice and try this product out. It did not let me down. I followed the directions and let the product cure as stated. the car accumulates soot/carbon within 150km (1 day travelling for me). with water and washmit, the product came right off! it has been 3 weeks with no degradation of slickness. the rest of the car is as it was day 1 with the finish and dirt flying right off. Must say, skeptical at first but WOW! a believer! Thanks for the great product!

June 24, 2020

This is the 2nd bottle of this that I ordered. I loved the first bottle and am about out. I washed both my cars and put Rejex on it with a polisher and and put on a different clean pad on to take it off and it shines very well. It has lasted a year on the one car and I applied a hydro finish over the other car and dirt and debris just comes off when it rains on it

February 18, 2020

I recently discovered this product from a friend who gave me a sample to try. I was so impressed with the gloss it produced with very little rubbing. It has held up incredibly well, much tougher than wax. My cowling and leading edges of the wing remain glossy and smooth to the touch. This product is exceptional in my opinion. I cannot figure how for so many years I have missed this one.

Roger P
September 6, 2019

Excellent product design, works and has ability to keep cars like new if used every6 months to a year.

Arnie P
May 1, 2019

Works great on the leading edge of the wing, makes removing bugs very easy.

November 29, 2018

This product came highly recommended by a friend and it seems to work exactly as advertised. Very easy to apply but I found that in the dry desert air of AZ that it only takes a couple of minutes before it needs to be wiped. If wiped immediately when the slightest haze forms, it comes off effortlessly and leaves behind a high gloss shine and a very nice finish. I used this on a 1978 Grumman Airplane which has always been hangared but it has original paint worked spectacularly. Time will tell how long it will last but after todays two hour flight, the bugs wiped off with no effort and the shine was not diminished. So far, I am very pleased with this product and will be re-ordering.

May 24, 2018

great product easy on easy off slick feel after application hope performance lasts as advertised

March 22, 2018

“Word of Mouth” convinced me to try this product. I wasn’t quite happy with a two step process I was using on my vehicles. 1st step with the DA microfiber pads and correction compound was great, but the final step wasn’t giving me much long term protection. So I’m trying Rejex as my 2nd step this time. The gloss is fantastic!! The vehicle’s paint has that “wet” look. If it can last/protect 4-6 months, it will be a winner.

Jack C
March 3, 2018

Very impressed with the way it removes dried bugs and how easy the residue removes and shine after.

Steve L
November 10, 2017


Q: Can this Rejex protector be shipped, in company with other items, by air to Australia?

Yes, this is not considered hazardous goods. No problem shipping to Australia via air.

Q: How many square feet does a 12 oz. bottle of Rejex cover?

Per supplier: The 12oz bottle covers a 22 foot RV, so at best guess we can say it covers 150 to 200 square feet.

Q: How is this Rejex stain pretector against exhaust that hazes the belly of a plane?

It will certainly help keep the soot,exhaust and oil from sticking to the paint on the belly. It will also make it easier to clean.

View in Catalog

View Image View in Catalog