Illuminated Single Pole Rocker Switches, OFF-ON, 12V / 20A |
Very functional for daytime, a little too bright for night flight.
The dimensions of the switch faceplate is approximately 1-1/4" x 3/4". Total depth of switch from top of switch to bottom of terminal is approximately 1-1/2". These are 12V / 20 amp switches. They are intended to be used as ON-OFF switches only, not designed for ON-ON.
No, for use on experimental aircraft only.
Yes, these switches are designed to be up for on and down for off.
The spade connection is .25" wide.
No, the bulbs are incandescent.
The panel cutout needs to be 1.12" (28.5 mm) in height, and .55" (14 mm) wide.
Yes you are correct. This switch is as follows:
1. 12V
2. Load
3. Ground
These are incandescent.