Crimps Seal-All terminals and seals in one cycle. Features two double Cavities, an orientation block and a ratchet mechanism to ensure that each crimp cycle is completed. Factory calibrated to be used only with Seal-All terminals and seals. Wire range 20-14.
Pro Seal-All Crimper MANF P/N WHTPSAC
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
This crimp tool does a fine job of crimping the conductor and seal at the same time. The alignment block ensures correct orientation of Pin or Socket tabs to the tools crimp faces. But sometimes it is difficult to push the Pin into it and this can result in the user pushing the lead further into the seal, Pin and tool. Because of this, I have more than once, accidentally pushed the wire through so that the Pins crimp tabs actually grabbed unstripped wire (insulation) rather than actual conductor, ruining the process. I wish I had saved myself some $ by just buying the Part #: 11-06592 crimpers which also handles 22 and 24 size Pins. These Professional crimps do not handle work that small!
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.