|UMA TEMP PROBE 1/8 NPT 1B1 NON TSO|
|UMA TEMP PROBE 3/8-24 1B2 AUTOMOTIVE NON TSO|
|UMA TEMP PROBE 5/8-18 1B3 LYCOMING NON TSO|
|UMA TEMP PROBE 10MM X 1.5 1B4 ROTAX 912 914 NON TSO|
|UMA 1B5F TEMP PROBE NON TSO|
|UMA TEMP PROBE 16MM X 1.5 PITCH 1B6 NON TSO|
|UMA TEMP PROBE 12MM X 1.5 PITCH 1B7 NON TSO|
|UMA CARB TEMP PROBE 1/4-20 1B8 NON TSO|
|UMA CARB TEMP PROBE 1/4-28 1B10 NON TSO|
|UMA 1/4-28 CARB TEMP PROBE 100 OHM RTD SENSOR|
|UMA TEMP PROBE 1/4-18 NPT 1B11 NON TSO|
(U) All 1BX (Refer to Image #1)
Non-TSO'd Temperature Probes contain a thermistor for temperature sensing. 6" Lead Wires
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
I originally had a single wire oil temp sender that had some fluctuation. This 2 wire probe is solid as a rock with my Dynon EMS 120.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, these will work together.
Yes, this probe will have a 6" lead.
The length of P/N 10-00968 in 24 inches excluding the head.
The whole probe is 1.5 inches overall length. The tip length is 0.5