Packed well

Richard B Verified Purchase

SS PIANO HINGE 3 FT MS20257C2

Good product, rapid delivery.

Michael H Verified Purchase

PIANO HINGE 3 FT # MS20257P5

Worked well for what we elected to use the product for, the only difficulties we encountered were, as we expected, were drilling through the stainless steel material even with the proper drill bits and the right drill speed. Well use it again when necessary.

Ami S Verified Purchase

SS PIANO HINGE 3 FT MS20257C4

It was what I wanted ,Well made.

Joseph G Verified Purchase

PIANO HINGE 6 FT # MS20257P5

this will work well for trim tab

Dennis L Verified Purchase

PIANO HINGE 3 FT # MS20257P4

The piano hinge p/n MS20257P5 that I ordered was perfect. After a long conversation with the young lady on the phone we confirmed it was the right part. Delivered one week later. I was very happy with the service, although the cost of shipping was more than the part. Very helpful people. I will be back.

Norman R Verified Purchase

PIANO HINGE 3 FT # MS20257P5

Yes, there really is a difference. A piano hinge is a piano hinge, right? Wrong. Im doing a minor upgrade to my Experimental and needed a small piano hinge. I ordered one from Amazon and when it arrived I realized it would not do. Poor quality, heavy and it already had holes. I sent it back and ordered one from Aircraft Spruce. Perfect, aircraft, quality. And it wasnt, that much, more expensive. You get what you pay for.

John P Verified Purchase

PIANO HINGE 3 FT # MS20257P2

Packaged really well by ACS.

Zackary G Verified Purchase

PIANO HINGE 6 FT # MS20257P4

Packaged really well by ACS.

Zackary G Verified Purchase

PIANO HINGE 6 FT # MS20257P4

Packaged really well by ACS.

Zackary G Verified Purchase

PIANO HINGE 6 FT # MS20257P4

good stuff

Timothy C Verified Purchase

SS PIANO HINGE 3 FT MS20257C4

OK

Brm A Verified Purchase

PIANO HINGE 6 FT # MS20001P4

Great hinge , well built

Gary K Verified Purchase

PIANO HINGE 3 FT # MS20001P4

GOOD STUFF BUT WISH I COULD BUY IT A FOOT AT A TIME!

+recieved good in good condition and prompt. I am very please with the service, thank you Aircraft Spruce.

I purchased this hinge to replace the one on my elevator trim tab on my Christen Eagle II. They were cut to specs, 9 7/8. They are soft aluminum, very light, and easy to drill. I recommend pushing the pin out 1/2, cutting off 1/4, and then pushing it back in and crimping the empty ends to keep the pins in place.

just what I ordered Thanks

As advertised and well wrapped protecting it from damage in shipping.

Very good, indeed. Works perfectly for my purposes.

MS20257C4 -This is one of those cases that you get what you pay for. -This hinge is very well built. -I bought this particular hinge to attach cowling to my aircraft and I am pretty sure that it is not going anywhere. -If you are looking for an all stainless very durable hinge and price point isnt your first concern, then this is what you should buy.

just as i ordered and arrived quickly

Screwed up the part in my RV-14A kit (measure twice cut once) and ordered this to replace. Came very quickly and was very well packaged.

The product was right, the service was great.

arrived as ordered in a timely fashion with particular attention paid to the way the item was protected during shipping. Perfect

Great hinge!! I thought I ordered 3 ft but it came as half a hinge 6ft long. Disappointed that it came with no pin. managed to make it work though.

More expensive than rolled piano hinge, but extruded hinges are worth it in my opinion. Could use better pictures in the online catalog, but a great product.

This hinge is the most pivotiest hinge I have ever beheld. It opens! It closes! It can hold two things together. This has changed my life forever, and for the better. Aircraft Spruce, how can I ever thank you enough?

Quality hinge..

Three-foot lengths of hinge arrived well-packed and in perfect condition.

Worked as it should.

Great product !repaired the door of a b19 i take care of

Nice piece of hardware. I needed to replace part of my piano hinge in a Piper Aztec nose bowl and this fit perfectly. Made of aluminum and easily bendable.

Excelente proveedor llego todo en tiempo y forma

Good product.

EASY TO ORDER AND QUICK SHIPPING TIME

As I required and ordered. Thank YOU.

High quality non extruded aluminum hinge material in 3’ lengths. Shipped promptly. Only complaint is one cut end was sharp!

Hinge was perfect easy to work with

The order was shipped in a timely manner and it was packaged securely so not to be damaged. And it was exactly what I expected

FAST SHIPPING WAS SENT IN ITS OWN PACKAGE BUT THE SHIPPING WAS FOR THE TOTAL ORDER. VERY HAPPY WIT THE PURCHASE

I was happy with the purchase.

Fast delivery and packaging was excellent.

Ive purchased the extruded and non-extruded for use on my RV-7A project. Excellent quality.

It is exactly what I needed

I ordered a 3 foot section of aircraft piano hinge. It arrived by UPS on time, but the cardboard tube had been opened (or the paino hinge that was in the tube punctured it). There was a six foot steel piano hinge (without the spine pin) which had been folded in half and stuffed in the tube. I e mailed a report to Aircraft Spruce then called. I was in touch with a Carol (1346) in customer service. I explained to her what I have written and within 10 minutes she had replaced my order and shortly after our conversation I received a notice that the part had been shipped. She was extremely knowledgeable, immensely helpful and comforting and within a few days a 3 foot section of aircraft piano hinge (complete with spinal pin) arrived via UPS and it had been taped to a small 3 foot section of 1x3 and placed in a cardboard tube. Perfect! Thank you, J. W. Wooten

Ordered 3 ft of hinge. It came as a 6 ft piece which probably increased the shipping cost. No hinge pin but fortunately I had some left over from another project.

During my annual on my experimental , my A&P gigged me on the wear of my aileron hinges and I replaced it with what I ordered , after checking the play I noticed some unexpected movement and was going to redo the replaced hinges. After thinking why not check the play on the new hinge un installed , and there was some looseness , showing this to my A&P we are asking is this the standard for new hinges ?

did the job needed

The hinge was nicely packaged for shipment. The quality is good overall, however there is considerable side-to-side play compared to other hinges. I measured the side play at .035, meaning there is a .035 gap between the segments of the hinge. This allows the parts to move side-to-side after the hinge is installed. I had to machine two small brass washers .015 thick and placed them between the links of the hinge in order to remove the side play.

Placed order for two sizes, got first order quickly and still waiting on the second size which is delaying my trim tab assembly... not a happy camper

Should have ordered the extruded one - didnt know.

Becareful when ordering, they dont tell you this, it will be shipped by itself and shipping will be twice the price. I had 12 items in the order, all came out of Georgia, this was shipped alone.