EVERYTHING FOR AIRPLANES SINCE 1965 | 877-4-SPRUCE

PHENOLIC SHEET 1/4" LINEN - .250

$21.70/Square Foot
Part# 03-52600
MFR Model# 20757
ThicknessWt./Sq. Ft. (Lbs.)Part No.
1/41.85303-52600

Overview

HIGH PRESSURE LAMINATED PHENOLIC
Commonly called “Micarta”, a trademark of Westinghouse. Laminated sheets, tube and rods are produced in many grades, sizes and colors. These laminates combine a base material- canvas, linen, paper, glass cloth or Nylon cloth, with a resin-phenolic, melamine, epoxy or silicone, under high heat and pressure to produce a new material with specific characteristics. These characteristics vary with the grade and its use.

GRADE L (Linen Base)
PHENOLIC SHEET
Used for precision machining and high strength applications.
Sheet Size: 36" x 48".
Sold in 6" x 6", 6" x 12", 12" x 12", etc. pieces only.

Less 15% for full sheets
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Ken S Verified Purchase

PHENOLIC SHEET 1/4" LINEN - .250

March 26, 2024

Good quality. Excessive shipping cost applied during online ordering. Order on phone.

Allan W Verified Purchase

PHENOLIC SHEET 1/4" LINEN - .250

August 6, 2021

what i ordered

Richard S
March 15, 2021

High quality item delivered on time as promised.

Keith
March 14, 2019

Just what is says. I ordered 6 X 6 piece and it was cut nicely so no waste from the cut line.

Dan
January 13, 2019

I purchased 3/16 phenolic sheet to make small scrapers for paint removal. I cut 6 lengths to various widths ground an edge on one end and rounded the other end so it wouldnt hurt my hands and presto! - a nice tool for scraping off paint or sealant without hurting aluminum. I gave this latest batch 4* rather than 5* because Im not sure it holds an edge as well as some previously purchased phenolic it seemed to fray a little quicker. But, I would buy it again if I run out of my current stock.

Chris B
December 21, 2017

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: I am trying to place an order on-line for two (2) peices of phenolic 1/8x6x12 pn 03-52500. Order system does not allow for less than full sheets. Please advise.

This material is sold by the square foot. Per the dimensions listed above, customer will need to order 1 sq ft, so 1 is the quantity to input, then click required information in the shopping cart and advise to ship as 2 pieces at the desired size. If customer only wanted one piece 6"x12", the quantity to order is .50.

Q: What is the MIL Spec for part number 03-52600?

The MIL Spec for this item number is MIL-I 24768/13.

Q: Is there a color option for the phenolic sheets or is it the yellow/amber color in the image?

Some sheets are a little darker than others, but for the most part they are all yellow / amber as shown.

Q: Can this Grade L phenolic sheet be painted?

Yes. Phenolic sheet has a flat smooth surface. Follow the prep instructions on the primer and paint being used.

Q: Are the GRADE L (LINEN BASE) PHENOLIC SHEETS ready for fiberglass bonding or do they have to be sanded rough first?

Some sanding is recommended to get a good mechanical bond when laminating.

Q: If I select quantity of 1, how much do I get?

It is priced and sold by the foot. Quantity 1 receives 1 foot.

View in Catalog

View Image View in Catalog