| Current sensor, +/- 100 AMP. Suitable for aicraft with 60 amp alternators. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Works
GRT Current Sensor +/- 100 Amp CS-01
This sensor works well with the Dynon Skyview for measuring current. Make sure that it gets shipped in a box to protect the sensor wire block from being bent and / or the wires being pulled loose.
GRT Current Sensor +/- 100 Amp CS-01
So far this seems to work as advertised. -1 star because It has no mounting points and the electronic pickup is sandwiched inside the magnet and is held in by friction. I don’t love it. It could fall out and you’d lose indication. I have a Dynon system and the GRT Hall effect sensor is the only Dynon supported brand.
GRT Current Sensor +/- 100 Amp CS-01
Please note, Aircraft Spruce ®'s personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce ® assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The internal diameter of the hole is 0.86 inches.
The internal diameter of the hole is 0.86 inches and the wires are not terminated.
Yes, this will work for G3X system.
Per the G3X manual: Electrical current can be sensed by the G3X system either by Hall Effect current sensors or through the use of a traditional ammeter shunt.
he UMA 1C4 ammeter shunt included in Garmin sensor kits.
COMPATIBLE SENSORS:
10-29VDC INPUT
AMPLOC KEY 100 HALL EFFECT SENSOR
UMA 1C4 shunt
Other ammeter shunt or Hall effect sensor types