The "R" or "L" following the dash number designates "right" or "Left." The "S" or "L" (2nd letter following dash number) indicates "short" or "long." AN 161 Fork and AN 170 Cable Eye are available with either right or left-hand thread.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Exactly the parts I needed, without delay! Thanks
Rather expensive, does what a turn buckle fork should. Does not have slit for using turn buckle locking wire...
Fast shipping, professional service.
The turnbuckle forks I ordered were here fast and were exactly what I needed. I appreciate the Fast Service by Aircraft Spruce.
Fast shipping and good items~~
It is the exactly what I needed, but only 1/4 of my order. I received 1 and was told the others are on backorder. I was told that the person I spoke with would check to see when the others are expected and would let me know, but she never contacted me with any information. As I near the final segment of my build before I cover the plane, I need those parts to complete the flying wire setup for my wings. Not happy with the customer service and apparent poor inventory of the part.
Catalog states this part number is used with locking clips. That is not the case as the parts I received did not have the clip slots. I am having to use safety wire to secure this part.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The number after the dash represents the fork dimensions. We have added a reference chart which should assist with ordering.
Yes, equivalent is MS21252-5LL.