FREE SHIPPING ON ORDERS OVER $350 (USA ONLY - SOME EXCLUSIONS APPLY) | 877-4-SPRUCE

RANTHANE J-9545 DAYTONA WHITE QT

$77.25/Quart
Part# J-9545-RQ
MFR Model# J-9545-RQ

Overview

Ranthane Aircraft Coatings

Ranthane requires three separate components (which are sold separately, see Options tab) that are mixed before application. All three components are required and cannot be substituted: Ranthane polyurethane paint, AU-2X1 Catalyst, and G-4200 Ranthane Thinner.

Mixing: Mix two parts Ranthane with one part AU-2X1 and stir. Allow to sit for 20 minutes induction time before use.

Thinning: For best results, thin 33%, then spray a vertical surface test area with a moderate coat to insure that the film has no orange peel and is not too runny.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

Got it. Back order came through in minimum time - thanks, Lee

Lee D
April 2, 2021

As usual, Ranthane is am Excellent product

Douglas R
January 19, 2021

Excellent Paint, I have been using Randolph Ranthane since 1975. Mandatory to use proper safety equipment when spraying.

Paul B
July 13, 2020

One of the best aircraft paints ever.

Eric M
July 23, 2017

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Do I need to order the catalyst for ranthane separately?

Yes, the catalyst must be used, and is sold separately.

Q: Is it possible to add a flattening agent to the black in order to get a flat black coating?

Yes, you can use part number 09-02052 (pint) or 09-02051 (quart) for Ranthane paints.

Q: I have a Ranthane custom color formula from consolidated aircraft coatings. Can I order this from you or do I have to order from the factory?

We can mix the Ranthane to the formula given, but it is a special order item. Be sure the color is correct for your application, and we will mix to their formula. To begin the special order process, please call sales at 877-477-7823.

Q: Are the cans of Ranthane topcoat full, ie. a full gallon? Some paints are 3/4 full and consider it a full gallon when activator is added.

Ranthane is not short filled. Depending on the pigments needed for a specific color, the tinted base color is approximately one gallon.

Q: Is this Randolph Ranthane recommended for use on both fabric and metal surfaces?

Yes, it will work on both fabric and primed metal surfaces.

Q: What primer do you recommend for use with light colored Ranthane

Ranthane may be applied directly over fabric surfaces when the Rand-0-Fill silver butyrate has dried at least 36 hours. More drying time is better. Epoxy primer should dry for one week over metal or composite surfaces before applying Ranthane. If you are painting a light color you would use the white epoxy primer.

Q: What epoxy primer product should be used under Ranthane paint on a metal surface?

They recommend EP420 epoxy primer.

Q: Where do I find EP420 epoxy primer?

Try a keyword search for EP-420.

Q: If wanting to make a quart of pain how many ounces of part b, do I apply?

This is a 2:1 mix, so two parts Ranthane to one part catalyst.

Q: Regarding Ranthane, does Aircraft Spruce mix a base color with toners to get to the final color, or are the final colors mixed by the factory and sent to Aircraft Spruce?

We mix the paint in-house.

View in Catalog

View Image View in Catalog