Add to Wishlist
Part# 11-11556
MFR Model# 10M-TALON


The 10M-TALON oil filter tool has undergone some changes through the years, improving as the demands of general aviation become greater. The TALON is one of the strongest and most compact yet. Just pop the TALON on a 3/8 drive extension and ratchet and it gets the job done.

The TALON Oil Filter Tool was created to remove stubbornly stuck oil filters. The tool is meant to be safe in tight quarters and unable to slip, attempting to minimize damage to nearby components. This is still a messy process but this tool is your best chance of removing stuck filters without damaging anything else.

Adjustable down to 1.10" in three prong mode for smaller oil filters
Adjustable down to .95" in two prong mode for smaller oil filters
Adjustable up to 3.14" for larger oil filters


  • Three pin (TALON) engagement in oil filter plate for stability and strength
  • Good for up to 1500 in. lbs. of torque
  • Works in tight spaces!
  • Works on Aircraft, Automotive, Marine and Recreational Vehicle applications
  • Made in the USA


  1. Open the filter can and remove the filter element. If necessary, cut or tear open the filter can where ever it is accessible, gaining access to the filter element.
  2. Use the new filter as a guide. Set the pin positions on the 10M-TALON Oil Filter Tool to fit into the oil holes in the oil filter plate.
  3. Insert the Oil Filter Tool into the stuck filter can using a 3/8" ratchet extension and ratchet wrench. Engage the oil holes in the filter plate with the pins of the oil filter tool.
  4. Turn counter clockwise to loosen the filter.


  • This is a lot less frustrating than trying to remove a stuck filter by any other method
  • Saves time so you can do other things
  • Saves money
  • Customers Also Viewed
  • Frequently Purchased With


This was my awesome life saver. Thank you

Martin B Verified Purchase


July 27, 2021

Worked perfectly, was a life saver. Removed an oil filter that felt like it was welded on.

Vince P Verified Purchase


July 9, 2021

The guy who designed this tool is an absolute genius. Tool works so good that I may just overtighten another filter just so I can use it again.

Bruce C Verified Purchase


July 6, 2021

This tool is going to work if you have a stuck filter, I had a boat with the original oil filter from 1995 rusted on from the inside and this little baby pulled it off in 15 mins. Honestly took 3 mins but I couldn’t find the holes with the mirror.

June 14, 2021

Like taking the cap off the toothpaste with this tool. Saved me taking the riding mower to the shop.

April 27, 2021

This was purchase to remove a filter on a boat. The filter housing is on the top left corner of the motor, factory remoted. Easy access. See it, touch it, all at the same time. I figured the filter change would be easy. I tried every type of oil filter wrench I have, four different ones. None of them budged the filter. Some of them will never be the same. Finally tried the screwdriver thru the can trick. Still didnt budge, tore up the outside can though. Cut the rest of the can off, removed what was rest of the filter. Saw the filter had been cross threaded when installed (before I bought the boat). Tried monkey wrenches and tried building my own tool using allen wrenches, vice grip pliers and a few other things I cant remember. Gave up. Only had 12 days before a planned trip to Lake Havasu. Started looking on-line. Found old add for the Talon. The one that was orderable is newer type. Ordered and waited. I think it was about 5 days. Within an hour of recieving tool, The old filter (well, just the bottom) was off. Housing treads were not damaged. Installed new filter. Lake tested, no leaks. The Talon tool was well worth the price. I hope I never have to use it again.

Warren E
April 19, 2021

Worked like a champ I tried The Strap Filter wrench Pipe wrench And the screwdriver trick by this time the filter was a mangled mess this tool worked great if your filter if destroyed just get this tool

February 10, 2021

Great tool! Been changing oil filters for many years. Never had one stuck so badly. Tried everything to remove it. This tool worked exactly as advertised! Great addition to my tool chest! Thank you!

November 5, 2020

I was very glad that this tool was available to the general public, and not just people in the aircraft repair field. I dont believe I would not have been able to get my vehicle back up and running without it. It took a little while to get the tool set up for use, but once I did it worked like a charm. The filter base came off in about 2 minutes. A great investment.

Graham D
November 2, 2020

I had a stuck oil filter on a Yamaha Waverunner. I tried every tool I knew and it would not come off! I ordered this tool and had it off in five minutes!

September 10, 2020


View in Catalog

View Image View in Catalog