SAME DAY SHIPPING ON ORDERS PLACED BY 4 PM | 877-4-SPRUCE

Fuel Tank Valve 90 Degree With Grommet

$8.50/Each
Quantity
Add to Wishlist
Part# 15-05334
MFR Model# 11032

Overview

Push In Fuel Tank Valve. Standard replacement valve and grommet for plastic or Quicksilver type fuel tanks. Right angle valve shut-off with a 1/4 turn of the handle. Requires 33/64" hole in tank. Barb end accepts any 1/4" i.d. fuel line. Supplied with Grommet.

Weight 2 oz.
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reviews

just what i needed worked like they were supposed to

Clifton Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

December 1, 2024

Accurate description, fast shipping

Wayne W Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

September 1, 2024

Dominic M Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

August 1, 2024

Mark J Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

June 25, 2024

Perfect replacement for my old DR brush mower leaking gas tank shut off valve

Mike K Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

June 21, 2024

Nice Part

Dwight N Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

February 7, 2024

My 2007 DR Power walk behind bush hog fuel valve started leaking. I contacted DR Power and all they could do was offer me a replacement fuel tank for $ 229 dollars. This was the identical valve and the repair was made for less than $20 dollars. Highly recommend!

Joe B Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

February 6, 2024

Work great. Thanks

Broward S Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

January 23, 2024

Worked out perfect Thank you

Anthony B Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

October 31, 2023

Fuel tank valve works perfect in my old DR brush cutter. Great service. Thanks

Jeffrey T Verified Purchase

Fuel Tank Valve 90 Deg With Grmmt

September 14, 2023

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: How much pressure (PSI) can this valve handle in a shut-off condition?

These valves are tested at 10 psi. This can go higher, but that is the pressure this was tested at.

Q: I would like to connect this in line if possible and I can’t tell from the photo, but it looks like both ends may have barbs to accept a fuel hose. What are the OD measurements on each barb fitting? Thanks.

They are 1/4 and 3/8.

View in Catalog

View Image View in Catalog