Aircraft Spruce & Specialty Co.
Contact Us
Call Us
Sign In
- Photo may represent series and not specific product
- SHARE
Insulator Panels - Single Sided - 4' X 6' Sheet
MFR Model# 11-406 BLIPA
FREE Shipping
- JUMP TO
- Overview
- Reviews
- Q&A
- View in Catalog
Overview
|
The Insulator is one of the finest sound proofing and thermal insulation materials available, and will last the life of the aircraft. The single sided Insulator panels are ideal for installation on interior skin, floor, engine covers, doors, headliners, and bulkheads. The Insulator uses multi - layered fiber plys bonded to reinforced high performance foil to provide optimum barrier to acoustics, radiant heat, thermal heat, and moisture. Insulator is available in 4x 6 panels or by the lineal foot (4 wide). Install Insulator with Sticky Stuff spray adhesive and Insul-Tape. Not FAA approved. Note: This part number is sold as a 4' x 6' panel. Thickness is 3/8". Single sided only. Discount: 15% less on orders for 20 sheets (assorted). |
 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Reviews
we cancelled that order as it was back ordered. but the first order arrived on time. there was enough product in the first order so thats why we canvelled one sheet. thank you
Verified Purchase
INSULATOR, ONE-PLY 4X6 SHEET
Please cancel this order for 1 sheet. Thanks
Verified Purchase
INSULATOR, ONE-PLY 4X6 SHEET
I havent used this insulation yet, but it looks like it will do the job. I was a little surprised at the weight. The 4X6 sheet weights about 4 lbs 12 oz. This was a little heavier than I expected.
Verified Purchase
INSULATOR, ONE-PLY 4X6 SHEET
Cotton fiber, see above. Foil goes toward heat source, leaves raw loose cotton fibers outward facing. Next.
Stuff burns faster then fire starter! It definitely fails the FAR23 Fire-retardant tests
Q&A
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The thickness of this material is 3/8 inch. Only comes in a light blue color. The insulation material can be touched, but may want to be covered depending on the application, and the elements of the area installed.
The "Not FAA Approved" note on this web page refers to the insulator panels, specifically part number 09-27400. However, the Sticky Stuff spray is also not FAA Approved.
The "Not FAA Approved" note on this web page refers to the insulator panels, specifically part number 09-27400. However, the Sticky Stuff spray is also not FAA Approved.
The "Not FAA Approved" note on this web page refers to the insulator panels, specifically part number 09-27400. However, the Sticky Stuff spray is also not FAA Approved.
The material has a class A fire rating. Tested ini accordance with ASTM C 177 and ASTM C 518.
This material is 3/8" thick.
The approximate weight per square foot is .17lbs/sq.ft.
