Nylon Polypenco. pressure tubing is a super tough, low friction, high flexibility tubing that can be used for cable protectors or in short pieces, as small bushings and washers.
Suitable for use in oil, air, vacuum, fuel and low pressure hydraulic lines. It resists abrasion and wears better than aluminum or steel tubing. Has an extremely smooth inner surface with a very low coefficient of friction. Used for brake lines, and also as a conduit for the rudder cables in the Rutan VariEze and Long-EZ. Rated 1000 psi. Sold by the foot.
Use Poly-Flo fittings with standard wall tubing. Click here for the Poly-Flo fittings webpage.
Note: Poly Flo fittings cannot be used with High Burst Pressure tubing.
Must use SAE fittings (See Accessories Tab).
Used to upgrade the brake system of my microlight FK9. Very easy to install, good quality.
3/16 OD X .138 ID NYLAFLOW TUB
II hope is is a good as I the Nylaflow I removed from my plane after 40+ years of use with no failures.
3/16" NYLAFLOW TUBING TYPE H
Always good product, fast shipment.
Perfect for Tracy O’Brien brake system!
Pretty simple stuff....does what it is suppose to.
All good ... quality parts, professional/respectful service and never had a problem.
Nylaflow, nylaseal, nylon ns, nsr, etc... Did I buy the right one? Hope so. I went overkill with the high pressure stuff so install was a little tough as it is not very flexible. I used in my Rans brake lines. Time will tell!
Works great for routing rudder cables thru the cockpit.
Glad to have found the correct hose for our gokart brakes at such a go price!
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this tubing is compatible with 5606 hydraulic fluid.
This tubing is priced and sold by the foot.
No, the Nylaflow tubing is not approved by the FAA.