|LPS 3 Premier Rust Inhibitor is a specially formulated long-term corrosion inhibitor protecting metal parts in inside storage for up to two years. When applied it forms a soft, transparent, waxy film sealing out moisture, air, acid, alkali fumes, and other corrosive elements.|
|Melting Point/Freezing point:||Not Available|
|Boiling Point/Range Aerosol:||Not Available, Bulk: 320°-392°F|
|Vapor Pressure Aerosol:||Not Available, Bulk 2.6 mm Hg @20°C|
|Partition Coefficient:||Not Available|
|Percent Volatile Aerosol:||63-82 %, Bulk: 78.45%|
|Flammability Limit:||Lower 0.6, Upper 6%|
|Propellant Aerosol:||Carbon Dioxide, Bulk: N/A|
|VOC Content Aerosol:||62.8%, Bulk: 75.58%|
|Flash Point:||Aerosol 64.4°F, Bulk 104.5°F|
|Relative Density:||Not Available|
|Evaporation Rate:||Aerosol - 151 (Ethyl Ether), Bulk: 0.2 (butyl acetate=1)|
|Vapor Density:||Aerosol: Not Available, Bulk 4.8|
|Auto-Ignition Temperature:||446°F (230°C)|
|Viscosity:||Aerosol-Not Available, Bulk: 20-550cP|
|Specific Gravity (water=1):||Aerosol: 0.87, Bulk: 0.81|
|Temperature Range °F(°C):||Not Available|
|4-Ball Weld Load:||Not Available|
I use Lps 3 to help prevent corrosion on automotive brake lines. Great product, but difficult to find in local stores.
fantastic product. used it to undercoat my 2019 Silverado. time will tell the longevity. great service and fast shipping from aircraft spruce.
Ok in certain applications. does not penetrate like corrosion x or acf-50. It is NOT a lubricant, it doesnt penetrate well and leads to messy, dirt attracting buildup. I wish people would not use it as a lube. My view is that it only seals things off and should be used thoughtfully as it will also seal things like moisture IN.
Great easy to use lubricant for all your aviation needs.
Product has protected our Bell 206 blades for over thirty years. Have never had a blade corrosion repair since I started wiping blades down weekly with LPS3. Shipping from Aircraft Spruce is a problem. Two of four gallons bottoms were deformed in shipment. They arent leaking, but dont want to stay upright.
Yes, it meets MIL-PRF-16173E Grade 2 Class 1. Please see the Approvals tab for additional spec info.
LPS 3 cannot be used in the manner described. It can be applied to a dry, rusted surfaces that has had any loosely adhered corrosion removed. It will not convert the rust but will halt further corrosion from occurring. It cannot be painted over.