Click Bond Fasteners mount to surfaces with adhesive. They are assembled in a disposable, self-fixturing device of plastic that aligns and holds the fastener in position and under controlled pressure while the bonding material cures. After the installation is completed, the holding fixture is removed and the conventional attachment is made to the fastener. Bonded fasteners eliminate welding or drilling surfaces and result in reinforced substrate strength, leakproof and corrosion resistant attachments. We offer Click Bond Fasteners in convenient, pre-packaged kits as shown.
Each cable tie mount in this kit is pre-assembled in a temporary, easy-to-remove fixture that holds the cable tie mount in place and under pressure while the adhesive cures. No additional installation tools are needed. The kit includes four CB3019AA3N cable tie mounts with nylon ties (5" 40 lbs.), one adhesive packet, surface preparation materials, and installations.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
This product worked well for my purposes. Unlike the previous review, I was careful to follow instructions on preparation and mixing and had more glue than needed for each supplied tie down. The glue is very strong and does not require much applied to be effective. This is my first time using this system and I will definitely be ordering it again as it solves my mounting problems
Click Bond products are great. This particular kit Provides only one very small packet of 2 part epoxy glue. The kit includes 4 cable tie mounts but there is only enough glue for one cable tie mount. Maybe two if used very sparingly. If you are not using all four mounts at the same time there is no way the glue will keep. There needs to be four packets of glue included for this kit to be complete. One glue packet for each mount would rate this 5 stars.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This kit contains