2024T3 ALUM SHEET .020 4X6

Part# 03-27830
Thick. (In.)Wt/Sq.Ft.
SizePart No.
0.0200.288Alclad4 x 603-27830


Aluminum alloy sheet is sold in the thicknesses and sheet sizes shown in the table. Order by part number. No guarantee against scratches is possible due to the handling required to cut sheets to sizes shown.

CUTTING CHARGES: We can cut standard sheet sizes shown in the table to special sizes, but special order cutting charges will apply. Cutting Charges range from $20 to $50 or more depending on sizes desired and number of cuts. Special shapes are not cut, only straight edges. Request quote on Cutting Charges prior to order, as special cut pieces are not returnable.

Mfg test reports are available for an additional charge per line item.
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm -


Couldnt be any happier with the lady by the name of Sandy that helped me with everything that I needed. The shipping was very fast and the product was excellent.

Ronald A Verified Purchase

2024T3 ALUM SHEET .020 4X6

March 29, 2024

For years I have been wondering about the rolled for shipment on long aluminum sheets. The 4x6 x.020inch sheet came rolled into an 8inch diameter tube and nicely packed inside a very strong 13x13 inch cardboard box. I would have thought it would have taken a set but when I set it free it expanded out with only a slight curve estimated at 15 to 20 foot diameter. There was no sign of shipping damage but one of the 4ft edges had a 6 inch crease perpendicular to the edge that Im guessing happened when it was being rolled for shipping.

James M Verified Purchase

2024T3 ALUM SHEET .020 4X6

January 5, 2023

No issues...

Larry V
May 14, 2021

Shipped properly and like the protective coating

James S
May 14, 2021

Great product.

Rebecca R
May 12, 2021

thank you for the prompt service!

Jeff P
April 26, 2021

I found the 2023T3 aluminum on several sites, but the price and the shipping rate from CPS was the best. The only question I had was why the item was shipped from Aircraft Spruce. It was well packed ,arrived in great shape and shipping was quick! Thanks, Steve in CO

Steven E
April 11, 2021

Great product

April 5, 2021

I ordered 2 sheets of 2x2 0.05 for engine baffling repair on my Twin Comanche. The sheets were packed very well and survived a hole in the side from the trip via UPS.

Vne L
March 26, 2021

Always love your service.

Pam F
March 19, 2021


Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the thickest sheet aluminum that can be rolled for shipping with UPS? 2024t3 and 6061t6

The thickest we can roll for shipping is .032 on both 2024t3 and 6061t6.

Q: With 2024 t3 4x12 .025 sheets. Does the polished surface have a protective covering to keep the mill finish pristine? Thanks, Jared

The aluminum sheets have a plastic sheet on both sides for protection.

Q: With 2024 t3 4x12 .025 sheets. Does the polished surface have a protective covering to keep the mill finish pristine? Thanks, Jared

The aluminum sheets have a plastic sheet on both sides for protection.

Q: Which way does the grain run on a 2025T3 2' x 4' piece?

The grain will run across the 2' section.

Q: Are both sides of the 2024T3 aluminum alcladed? If not, which side is? The printed or unprinted side?

Yes, the alclad coating is on both sides.

Q: What certified specification does this 2024-T3 material meet?

This 2024-T3 meets the following specs: AMS4462, AMS-QQ-A-250/5/RevB, ASTM B 209/Rev10, CMMP 019/RevD, CMMP 025/RevU

Q: With 2024 t3 .040 sheets, is there plastic on both sides for protection (as you noted is the case for 2024 t3 .025 sheets)?

Yes, there is protective plastic on both sides of the sheet.

Q: What is the thickness tolerance of 2024-T3, 0.032 sheet ?

+/- 0.003

Q: Aluminum sheet orders can only be ordered in a maximum length as part numbers shown?

Yes, full sheets of 2024T3 are 4' x 12'.

Q: the full sheet 4 x 12 (in inch or ?) thanks

Full sheet 4 x 12 is 4 ft x 12 ft.

View in Catalog

View Image View in Catalog