Note: STC is pending for use on US type certificated aircraft. This part can be manufactured under contract with the owner operator under FAR 21.303b2. It is the owner operator's responsibility to determine airworthiness and applicability. |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Just to add to my previous review after consulting with Spruce they were gracious enough to issue me a full refund amount for this glare shield. Thank you.
Beautiful appearance and quality material. It only needs some trimming to fit but will be very easy to do. I’d buy it again
Like the 1-piece design but a little short on the ends so it doesn’t tuck tight to the windshield or behind the sidewall panels like the OEM panel. It sits about an inch above it the sidewall. Good fit around the rest of the windshield otherwise so didn’t have to trim for a good fit, just cut holes for the defroster & compass bracket.
Couldnt be more disappointed. This is by far the worst fitting product Ive ever bought. I would suggest Aircraft Spruce stop distributing these. I recently bought one for an 80 172N. To say trimming was required is an understatement. There are essentially zero install instructions. We simply refused to install it. It wont fit properly at all and has zero flexibility, the front lip is showing fiberglass underneath it and is a really poor look, and it sticks out way too far, about 3-4 inches. Plus it will not fit the existing aluminum structure. We decided to apply vinyl for the glareshield and cover and stitch the existing eyebrow instead of installing this product.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
These lights are standard white lights. They are separate from the glareshield and are removable. Yes, this product is STC'd.
It is a string of incandescent lights, and are commonly glued to the bottom of the eye brow, but they can be glued to any area the installer feels is best.
No, the lights are incandescent.