FREE SHIPPING ON ORDERS OVER $350 (SOME EXCLUSIONS APPLY) | 877-4-SPRUCE
Thumbs 1
Thumbs 1

Bolt Undrilled AN6-25A

Packaged Items
SinglePack of 5
Dash No.Nominal
Length
Grip
Length
AN6C Stainless
Drilled
AN6C Stainless
Undrilled
-252-23/322-1/16----

Overview

Hex head aircraft bolts are made of high-strength type 4037 or 8740 alloy steel (type 8740 is most commonly used). The bolts are centerless ground and threaded after heat treatment. Minimum tensile strength 125,000 PSI. Cadmium plated per specification QQ-P-416A, Type II, Class 3. Available with shank drilled for cotter pin or undrilled for stop nut application, and with or without drilled head for safety wire. Specify bolts to have undrilled shank by adding letter "A" after the dash number. For bolts with drilled head add letter "H" after the AN number. See illustrated examples. "C" represents Type 431 Stainless Steel (contains iron which is magnetic). The length of AN aircraft bolts is measured from under the head to the end of the shank. The "grip" is the unthreaded portion of the shank. See table for conversion of length and/or grip to proper AN callout.



Note: Drilled bolts listed above are drilled shank only. To order drilled head only or both drilled head and shank bolts, please use our AN Bolt Selector by clicking the link below.

Click here for the AN Bolt Selector
   
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Reference Chart

Reference Chart

Reviews

Return T Verified Purchase

Bolt Undrilled AN6-25A (Pack Of 5)

July 26, 2024

good

Jerry Z
March 24, 2021

Good quality bolt

Blaine W
December 18, 2020

Hey - it’s a bolt! That said, I ckrcked the dimensions and the cad consistency and it was good. Fit my tight fit holes perfectly. If marriages had this level of “fit” there’d be fewer divorces.

Carl
December 3, 2020

Great deal, thank you!

Jennifer H
November 5, 2020

Upper Rh engine monut bolt

Steven
August 24, 2020

Bolts came very quickly and were packaged very well.

Dennis A
August 14, 2020

Im using these bolts to mount my prop. So far so good.

Rob
July 24, 2020

All good

Von M
July 13, 2020

These are used in high performance skateboard trucks (dtskate.com) and need to be replaced periodically due to fatigue. Have always purchased and recommend Aircraft Spruce for best pricing, shipping, and customer service. Thanks and Stay Stoked!

Mike W
June 23, 2020

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: Can you provide an average weight for AN6-7A?

The average weight for quantity 1 of AN6-7A is 0.04 lbs.

Q: Do the undrilled AN6 bolts listed here still have a hole through the bolt's head?

No, the undrilled bolts listed here have no holes. To find the bolts with drilled head only, keyword search " AN Bolt Selector " on our website. The first result will be a drop down selection page and you can choose the different drilled options for each bolt we carry.

Q: How do I add the H to the part number for a AN6H-30A bolt?

The fastest way to add this bolt to your shopping cart would be to go to the cart screen, and enter it in the area that says "Quick Add to Cart". Just put AN6H-30A in part # box and whatever quantity you want in the quantity box and click add. That particular bolt is not order-able from this page.

Q: Are these FAA PMA replacements or only for homebuilt aircraft?

Hardware does not need FAA Approval. The hardware listed on this page is MIL spec and can be used on certified or homebuilt aircraft.

Q: I need an AN6-60A bolt not on your list above. What is difference from your AN6-60 BOLT?

AN6-60 is cad plated with a drilled shank. AN6-60A is cad plated, undrilled.

View in Catalog

View Image View in Catalog