|ES6279 EPOXY QUART PART A|
|ES6279 EPOXY QUART PART B|
|ES6279 EPOXY QUART KIT|
|ES6279 EPOXY GALLON PART A|
|ES6279 EPOXY GALLON PART B|
|ES6279 EPOXY GALLON KIT|
|ES6279 EPOXY PAIL PART A|
|ES6279 EPOXY PAIL PART B|
|ES6279 EPOXY PAIL KIT|
|Manufactured by PTM & W Industries, Inc. ES6279 is a light grayish-tan two part adhesive that was developed specifically for difficult bonding problems involving similar or dissimilar materials. ES6279 provides excellent adhesion to a wide variety of materials such as aluminum, steel, brass, glass, ceramics, and wood. The mix ratio of 1 to 1 by weight or volume allows easy measuring, and the creamy, smooth viscosity allows easy, uniform application. The cured material has excellent strength as well as good resistance to weak acids, moisture, and weather. ES6279 has been used successfully for many years in a variety of general bonding uses as well as numerous production applications.|
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
Arrived in just under 24 hours. Everything as described.
Love this stuff, glued metal hinges back on to glass hatch on the wifes Suburban. It only saved me about $1700.00!!!! Cant wait for something else to break. Would recommend this product to anyone!!!! Thank you very much AIRCRAFT SPRUCE !!!!!!!!!!!!!!!
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Gel time is 20-30 minutes, and the cure time is 6-8 hours. Reference part number 02-30025