|Phenix Select-Flo Fuel Filter: select the inlet size from -6 to -10 and the outlet size from -6 to -10 based on what your engine needs. No ORB fittings to buy in addition to the filter, the male AN is machined onto the filter caps, along with 100 micron. All filter elements in stainless steel mesh so they can be cleaned and used indefinitely. Proudly manufactured in the USA
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Appears to be a high quality item. Weighs twice as much as a disposable filter, but unlike disposable filters it can be used in gascolatorless systems in Canada (see MD-RA document C52E). Length from tip to tip (AN6 100 micron version): 165 mm Width: ~48 mm Dry weight: 354 grams Comes assembled finger tight manufacturer says torque to 30ft*lb (no instructions included).
SELECT-FLO FILTER-6 IN TO-6 OUT BLK / 100 MICRON ELEMENT
Its a really well fabricated filter. Strong and great finishing. I have not used yet. My RV-8 aircraft is under construction, so I cannot say anything about functionality. Other than that its a great product.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
The OD is 2".
It is safe to use this filter in an EFI environment; up to 150 PSI.