Note: The tape in the image is shown are clear. No white backing. Different angle of tape on the right makes it appear to have the white backing. This only comes in clear.
3M™ Polyurethane Protective Tape 8672 is an 8 mil, leading edge erosion protection tape comprised of a tough polyurethane backing and an acrylic adhesive. It resists punctures, tearing and abrasion, and resists ultraviolet light. This tape is qualified to aerospace specifications. |
Units | Typical Value | |
Color | - | Transparent Clear |
Thickness | in (mm) | 0.006 inch (0.15 mm) Film 0.002 inch (0.06 mm) Adhesive Total thickness 0.008 inch (0.21 mm) |
Liner Type | - | Paper |
Weight w/o Liner | lb/yd2 (g/m2) | 0.47 (236.3) |
Tensile Strength | lbs/in (N/100mm) | 40 (700) |
Elongation @ Break | % | 500 |
Adhesive Type | - | Acrylic |
Peel Adhesion at 70°F (21°C) to: Bare Aluminum Acyclic Enamel Paint ABS Plastic | oz/in (N/100mm) | 60 (66) 43 (48) 50 (55) |
Max. Service Temp | °F (°C) | 275 (135) |
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
This part does not have specific applications. You and/or your mechanic would need to review the application instructions to determine if it could be used.