o-rings required to reseal the Cessna shimmy damper.
|
![]() |
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov |
CESSNA 150/152/172 SHIMMY DAMPER SEAL KIT
CESSNA 150/152/172 SHIMMY DAMPER SEAL KIT
CESSNA 150/152/172 SHIMMY DAMPER SEAL KIT
I cant find my snap ring pliers....
CESSNA 150/152/172 SHIMMY DAMPER SEAL KIT
Good quality o-rings. 👍
CESSNA 150/152/172 SHIMMY DAMPER SEAL KIT
Just what I needed, it’s an easy fix
CESSNA 150/152/172 SHIMMY DAMPER SEAL KIT
Had a problem with the kit as ordered and/or provided.
CESSNA 150/152/172 SHIMMY DAMPER SEAL KIT
This kit has the right parts at very low cost. Its the difficulty of completely disassembling the damper to replace the front shaft o-ring that took 2+ hours. The new o-rings fixed the oil leaks since the old shaft o-rings were hard and tough to pry out of the housing and front plug.
One of the few aviation things that doesn't cost a fortune. Works well, comes with all needed to rebuild the shimmy. I've done two already. Note: If your shaft is damaged, such as nicks or scrapes, it may not completely solve the issue, and you will still need to refill it with fluid after some time since nothing is perfect.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Qty 1 AN6227B-18 (O-RINGS AN6227B-18 MS28775-213)
Qty 2 AN6227B-6 (O-RING AN6227B-6 MS28775-011)
Qty 1 AN6227B-20 (O-RINGS AN6227B-20 MS28775-215)