Part# 05-07352
MFR Model# CA452-394
DescriptionOEM PNPN
BEARING,STABILATOR 452-394452-39405-07352


PMA Products Inc. replacement OEM equivalent parts for your aircraft.

See "Documents" tab for Application

FAA-PMA approved replacement parts will help maintain your Piper aircraft in good airworthy condition as you save money at the same time. Some of the parts have special features, such as the O ring protector that comes with the 05-07424 nose strut tube 65280-000, so that you can install it without cutting the O ring that must slide over the retainer ring groove at the top of the tube. The PA23/24 fuel cap rubber is specially formulated and guaranteed not to swell in Avgas.
California Prop 65 Warning Symbol

WARNING: Cancer and Reproductive Harm -


Fit like a glove

Roger F
April 9, 2021

The pump did the trick for us. It works just as expected and replaced our original pump, which was 42 years old.

Marc N
March 17, 2021

Fit like a glove on a PA28-235. Early morning dew and frost had led to water running into my right main tank to the point that it was taking 3-4 sump drain samples to get to avgas. The first time I flew after replacing the gaskets 2 days earlier, I had no water in my tanks. They worked great.

Dale S
December 17, 2020

Purchased to go into a 1965 Piper PA28-180. Unit installed into the existing location perfectly with only slight modification (ream 2 bolt holes slightly). All paperwork necessary for FAA included. works great after bleeding the air out of the fuel line at carb. If I didnt bleed the air, the pump would not prime itself. I would recommend this pump if your application is listed as approved from the MFG.

Rich E
August 28, 2020

These new rollers made a drastic improvement in the operation of the seat, replacing the original 1964 rollers.

Roger F
June 29, 2020

Nice pliable rubber and a perfect fit.

Thad B
June 11, 2020

Good price and received it quickly. Thanks

William A
December 13, 2019

Quick ship!

Pro A
December 8, 2017

An exact fit and performes well.

Darrell T
February 24, 2017

Good service by Aircraft Spruce but replaced same pump that only lasted 2 years, and pump is only on for takeoff and landing- Poor longevity

February 15, 2019


Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What is the inside diameter, outside diameter, and thickness of PMA Product's, Inc.'s FUEL CAP GASKET 66815-000? Your part number is 05-07427.

Approximate dimensions: 3" OD, 2" ID, 1/16" Thickness

Q: Do we require and authorization to use STC SA02410AT for the specific aircraft the PMA part is being used? Or do we merely have to have a copy of the STC?

These items comes with an 8130 and the vendor has PMA on the parts.

View in Catalog

View Image View in Catalog