Description | Part Number | Price | Buy |
---|---|---|---|
ECON HAND RIVET SQUEEZER 1" WITH YOKE | 12-01460 | $114.75 | |
ECON HAND RIVET SQUEEZER 2" WITH YOKE | 12-01461 | $116.75 | |
ECON HAND RIVET SQUEEZER 3" WITH YOKE | 12-01462 | $121.90 | |
ECON 1" YOKE ONLY (NO SQUEEZER) | 12-01457 | $34.50 | |
ECON 2" YOKE ONLY (NO SQUEEZER) | 12-01458 | $35.75 | |
ECON 3" YOKE ONLY (NO SQUEEZER) | 12-01459 | $38.50 |
All-steel construction, adjustable set holder (accepts all sets with 3/16” shank), and long handles for increased force. Yoke is made of the highest quality tool steel. By simply removing 3 pins you can change the yoke to match your riveting or dimpling application. The squeezer includes the yoke of the coordinating size. |
![]() |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Works very well for nut plates in tight spaces and squeezing rivets on edges of wings or trailing edges
ECON HAND RIVET SQUEEZER 1" WITH YOKE
I have used the 1 oke Econ quite a bit. The position of the rivets I need to squeeze are always within 1/2 inch of trailing edge so this tool is ideal.
ECON HAND RIVET SQUEEZER 1" WITH YOKE
I received the head but not the handles of the yoke I ordered
ECON 2" YOKE ONLY (NO SQUEEZER)
Nice to have 1 and 2 yokes to be able to rivet in the occasional tight/hard to reach spots
ECON HAND RIVET SQUEEZER 1" WITH YOKE
Appears to be well made and appropriate for the job. One that will not break on first use.
ECON HAND RIVET SQUEEZER 3" WITH YOKE
This rivet squeezer is EXACTLY what I needed.
ECON HAND RIVET SQUEEZER 1" WITH YOKE
Quality tool, made in taiwan. Bought together with additional 3 yoke and 17pcs squeezer set assortment.
ECON HAND RIVET SQUEEZER 1" WITH YOKE
I needed an economical squeezer to dimple a small amount of holes on a RANS S-21 build. I didnt want to spend big money since there are only a few flush rivets on that kit. This is a simple design and sturdier than I expected. It got the job done quickly and precisely. I would buy again.
Item was just what I needed for my project, I had a question about adjustment before I bought. Got the answer and purchased the squeezer.
First one I got was not put together right and broke first time I used , glad you replaced it.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Yes, this would come with the 2" yoke.
The 12-01460 is sold with a 1" yoke included. It has a 1" depth clearance.
Yes, it will accept a die.
The gap is roughly 1-1/4 so with the sets approx 3/4 long.