|SLOW-CURE™ 30 min. epoxy works best for forming reinforcing fillets on joints. It has the highest strength of our epoxies. It is waterproof and more heat resistant. SLOW-CURE™ can be used for bonding if you’re willing to wait overnight. Fillers such as microballoons can be mixed with SLOW-CURE™ and FINISH-CURE™ to form a putty-like consistency. Such fillers will usually decrease the working time by about 25%. Bonded objects can be handled after 8 hours and the cured epoxy reaches full strength within 24 hours.|
As usual, both product and service were top-notch. I have often, in the past, used epoxy from Aircraft Spruce to construct the wooden parts of several airplanes. Now, unable to pilot an airplane due to the effects of Agent Orange, I build replicas of firearms from the 1750s to the 1820s. And I make knives. This particular product will be used to glue the scales (handles) to the blades. This works very well, and does it in a timely fashion, leaving me plenty of open, working time, then making a permanent bond.
A very good product.
I have used this product many times in the past and have always found it to be an excellent adhesive. Working life is good and full cure is as advertised and makes for an excellent bond between different materials.
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Part # 01-01444 has a product weight of 4.5oz of each bottle for a total of 9oz.