|Clocks are constructed for easy installation in a wide variety of replacement applications for home builts. The rugged quartz movement is accurate within 2 sec. in 24 hrs under normal operations and runs accurately in temps from -30º to 180ºF.|
Needs to have teflon coated wiring for airplanes.
Delivered promptly and working well.
clock is in and works fine I wonder with future up grades should I installed it.
Mine has been running since October 2017. I reset for daylight- standard time, otherwise it stays within a minute.
very happy with looks and time keeping reasonably price and well constructed
I wanted to wait a week or two to review the clock to make sure it kept working. My luck was much better that the previous reviews. Clock arrived quickly and well packaged. Change out of my old quartz clock was straight forward and replacement took about 20 minutes. So far Iâ€™m very pleased!
Good price, received it right on time, as usual But, you may want to examine your stock, as to the rear mounting nuts. The clock I received (albeit in great shape) has the rear mounting nuts only halfway cut through from the ferrule that runs from front to the backside of the panel. Screwdriver wont get into the cut slot enough to break the nut loose, and there doesnt appear to be any other means of freeing it. Using another two nuts will work, but the clock then has a space between it and the panel surface.
Mine quit working after six years. Now, I have to decide if I want to buy another one. If I buy a different clock, I will have to change the connector, and thats a hassle to get to at the top of the panel with hardly any room for my hand.
Mine worked for three years...
clock worked for 2 hrs then stopped then started for a day then stopped. replacement is being installed. not sure if problem only on 28v. clock says 28v.
This clock fits in a 2-1/4" hole and has a depth of 2 inches not including wiring.
The clock weights about 4 ounces.
Per the supplier: 10-11 Milliamps.
No, it is not lit and is made by Instrument Services Inc.
Per the manual, "This clock is to be used as a time indicating clock only. It is not to be used as a flight instrument and or warning instrument."
Yes, the wiring is included in the box.
Per the supplier: 10-11 Milliamps is the current draw on this unit.
Yes, there will need to be a cutout to allow the stem through the panel.