THE AVIATION SUPERSTORE FOR ALL YOUR AIRCRAFT & PILOT NEEDS | 877-4-SPRUCE
Thumbs 1
Thumbs 1
Thumbs 1
Thumbs 1

LED ANTI COLLISION BEACON 8002 RED 12V

$128.75/Each
Part# 11-07241
MFR Model# 8002ACB-R-12V

Overview

LED based self-contained, High Impact, red, Polycarbonate Optical Lens. Lighter, Brighter, Cooler Longer Life (up-to 50,000 hrs.) and draws less than 1 amp. (.13 amps) @ 12vdc. Weighing in at 3.5oz. it stands 3" high and 2.5" in diameter.

Specifications

  • Weighs: 3.5 oz.
  • Stands: 3" high
  • Diameter: 2.5"
  • NON-PMA
  • Frequently Purchased With
  • Customers Also Viewed
  • Related Items

Reviews

Works perfectly as advertised

Lewayne G Verified Purchase

LED ANTI COLLISION BEACON 8002 RED 12V

December 12, 2021

Works great, easy to install. This light draws far less power than the original light. Had to make a mounting plate to fit the original beacon hole, overall very happy with this light

Steven T
November 1, 2021

Looks good. Tested good. How long will last? Have no idea! LOL

Lewis M Verified Purchase

LED ANTI COLLISION BEACON 8002 RED 12V

September 24, 2021

These are a great low cost beacon.

Cowans A Verified Purchase

LED ANTI COLLISION BEACON 8002 RED 12V

May 29, 2021

Worked as advertised and was relatively easy to install.

Dean K
March 5, 2021

Works like advertised . No amp draw. Simple install.

Bob H
May 3, 2020

If you are looking for a good cheap beacon to replace yours this will do. But if you want one that will make you look away this ain’t the one. I bought this to replace the one on my C172 & it does the job. I had to purchase a adapter & drill holes but it works great. I’m gonna get a clear one to put underneath. These are LED so they sure use less current.

Ronnie
February 15, 2021

I reviewed this item previously and this is an update. The beacon I received would not flash. As others have discovered, if the mounting studs are grounded the beacon will come on steady and not flash. Isolate the studs with a grommet and it works fine. I had a long talk with the folks at the factory and they asked me to send it back. I received a replacement that worked perfect. I was told that they were implementing a fix for the grounding issue so this shouldnt happen in the future. The beacon is LED, fair on the brightness with the red lens and very cheap compared to other LED beacons. It is all plastic and would probably not hold up to impact all that well but we have it on the belly of a c-170 that hardly ever lands on pavement. So far so good. You could replace this whole unit for the price of a bulb or lens on the other beacons. Not TSO, but check the regs on aircraft certified without anti-collision and do the proper paperwork.

Ga
March 29, 2020

I read other reviews and have solution for light not flashing then my thoughts. I bench tested before I left spruce, worked fine. Installed on AC and light came on solid. Wtf. Found out it can not be chassis grounded. The studs must be isolated from the airframe. For being led it is way to dim and kinda directional. 4hrs and still working. Good luck

Wayne
December 18, 2019

well I would like to give this beacon a good review because its hard to find a reasonably priced LED beacon these days. Installed the unit easy enough but when tested it comes on nice and bright but does not flash. When I tried to return the item to Spruce, they said that I would have to go through the manufacturer for returns. Very confusing. Spruce always takes care of me but not with this beacon. Manufacturer first asked if there was a flasher unit in my circuit and of course there isnt. they said their flasher is part of the bulb circuit and said to ship it back and they would have to evaluate it before sending a replacement . Dont know why they wouldnt just swap it out. Unit is all plastic and similar in construction to the whelen 70509. Jury is still out on this one. I will update the review if someone gets me a working unit.

Goodfriend A
November 1, 2019

Q&A

Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

Q: What are the dimensions of the base of this 8000 Series LED Red Anti-Collision Beacon? Is this a 24V light?

The dimensions are 3" high and 2-1/2" diameter. It is a 12 volt light.

Q: Is there some provision inside the light to block the light in a certain direction (towards the cockpit)?

Per the supplier: No, there is not.

Q: Does the PSA 8000 series LED red anti-collision beacon contain the bulb?

Yes, the bulb is included.

Q: Does the PSA 8000 LED anti-collision beacon pulsate or appear to rotate without the need of a motor to turn it?

Per the supplier: The unit flashes at a Rate of 50 to 60 per min.. no motor and no turning. Self contained in the lamp its' self.

Q: Is the PSA Enterprises 8000 Series (LED) Red Anti-collision Beacon TSO'd?

The PSA Enterprises 8000 Series (LED) Red Anti-collision Beacon is not PMA/TSO'd and is designed to be used with experimental aircraft.

Q: How bright is it.

The PSA 8000 series red anti-collision beacon (11-07241) is rated at 50 effective candle power.

Q: Does PSA 8000 come with a mounting bracket?

This unit has attached studs for mounting.

Q: Does it fit Whelen Rotating Beacon? If not, is there an adapter available?

No, you would have to remove the Whelen beacon and install this part.

Q: looks like it needs a base to shut the gap at the base? If so, what part number is compatible with it?

This would mount directly to the skin of the aircraft. You would need to drill a hole for the wiring and two holes for the studs.

View in Catalog

View Image View in Catalog