RCPI UNIT/REMOTE SWITCH/E-01 (E-01-05)
Note: Battery not included. It requires one Duracell battery PX-28L.
Did not come with required battery and was not clearly labeled to state that.
Good to have a supplier of cheaply made expensive parts. If mount screws were better made, damage requiring replacement wouldnt be needed
Would not work with my 121.5 elt even after waiting a week for that special battery.
Works fine. Battery is easily available at any large hardware store, or via Amazon. Battery is 2CR 1/3N 6V. A two pack is six bucks on Amazon, free shipping if you are prime. The gadget AND the battery is probably one of the least expensive things in aviation! Comes with horizontal and vertical faceplates.
Walgreens no longer carries the battery for this.
Remote control battery can be obtained at Walgreens as Radio Shack is defunct.
The LED light burns out about every two years . Talked to company about this and the more we talked the more broken english he spoke . He could help me ! Fact ! Tom
It is a single Duracell PX28L 6V lithium battery.
The ACK E-01 remote switch does not come with the cable. The cable is included in the box when purchasing the E-04 ELT.
To replace the battery, you need to remove the remote switch from behind the panel and undo three screws from the unit.
The remote switch has a panel cutout size of 1.5" X .62".
No, the remote switch is not cross compatible.
No, this unit does not come with a battery but you can get one at a local Radio Shack. It is a Duracell battery PX-28L.
The e-04.5 is the remote switch used in conjunction with the e-04 elt.
Yes, this is the ACK model # E-04.5. It is the same one that comes in the box.