EkoFill protects the substrate from ultraviolet (UV) radiation by both absorbing and reflecting UV radiation. This is an extremely important characteristic for fabric covered aircraft as well as some composite aircraft and components. During testing for the STC, the complete fabric process containing three crosscoats of EkoFill was tested for UV resistance. That test involved a very intense UV exposure simulating many years of sunlight. The standard for that test is that the fabric can lose up to 20% of it’s tensile strength and pass. The result was that it lost 0.5%! EkoFill is extremely effective at stopping UV radiation and ensuring that fabric and composite components will last for many decades, even when stored outside.
Secondly, EkoFill will fill minor imperfections and sand to a smooth, level finish. EkoFill can be used to fill and sand on fabric as well as composite. Thirdly, EkoFill as a primer provides an excellent surface for paint to adhere to. When properly sanded and cleaned, Stewart Systems EkoPoly Premium will bond to the EkoFill with extreme adhesion. EkoFill may be used on fabric, composite, wood, vinyl and many plastics. It is, however, not recommended for application on bare metal as it does not have corrosion inhibiting properties. Because EkoFill does not contain any metallic components, it will not interfere with radio reception or transmission allowing antennas to be mounted under fabric. The natural color of EkoFill is charcoal and therefore cannot be tinted to any other color. |
![]() |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov. |
Eko Fill easy to use and covers well
Eko Fill E620 Gl
Great product, easy to apply
Eko Fill E620 Quart
Super fast shipping A1 service once again
Eko Fill E620 Gl
Purchased to repair hangar rash on my Luscombes fabric wing tips. Very easy to use.
Eko Fill E620 Quart
Please note, Aircraft Spruce ®'s personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce ® assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Per vendor, you can cover up to 300 square feet per gallon. For 40 yards, they suggest 3 gallons.
We are adding the MSDS to this webpage Documents tab today. Please check it and download from there.