|Description||ID||Part No.||Dash No.||Price / Ft||Length||Buy|
|Ducting Vena HTD||5/8||05-30601||-2A||$5.95|
|Ducting Vena HTD||3/4||05-30602||-3||$3.95|
|Ducting Vena HTD||7/8||05-30603||-3A||$4.65|
|Ducting Vena HTD||1||05-30604||-4||$4.75|
|Ducting Vena HTD||1-1/4||05-30605||-5||$6.85|
|Ducting Vena HTD||1-1/2||05-30606||-6||$6.85|
|Ducting Vena HTD||1-3/4||05-30607||-7||$7.55|
|Ducting Vena HTD||2||05-30608||-8||$9.50|
|Ducting Vena HTD||2-1/4||05-30609||-9||$10.50|
|Ducting Vena HTD||2-1/2||05-30610||-10||$10.50|
|Ducting Vena HTD||2-3/4||05-30611||-11||$12.50|
|Ducting Vena HTD||3||05-30612||-12||$12.50|
|Ducting Vena HTD||3-1/4||05-30613||-13||$13.55|
|Ducting Vena HTD||3-1/2||05-30614||-14||$14.85|
|Ducting Vena HTD||3-3/4||05-30615||-15||$16.60|
|Ducting Vena HTD||4||05-30616||-16||$16.70|
|Ducting Vena HTD||4-1/2||05-30618||-18||$17.80|
|Ducting Vena HTD||5||05-30620||-20||$19.50|
|Ducting Vena HTD||6||05-30624||-24||$21.50|
Sold by the foot.
Flexible hose made of two layers of fiber glass and silicone coated with a non-visible steel wire inside the hose wall.
Recommended in gas conductions at high temperatures, engine exhaust fume extraction from a point immediately close to the ejection area and as protection of electric cables passing through extremely hot areas.
This product is manufactured with two fiber glass reinforcements with high temperature resistance silicone rubber. There is an inner steel wire inside the hose wall.
Operational temperature range from -55ºC (-67ºF) to +260ºC (+500ºF). It may reach up to 300ºC (+572ºF) during short periods of time.
Stock diameter listed in ordering grid. Diameters not listed are available as a special order in full lengths only. Full factory lengths are up to 13 ft. Varies by warehouse. For lengths over 13 ft, contact sales to confirm availability.
I was asked to write a review of this duct, so I shall: The duct does indeed, duct air, as advertised! I am giving it 4 not 5 stars because after about 5 years of medium-duty use and some connects and disconnects for maintenance, it does need to be replaced. Maybe that is not great, but only just good?
Better than my original SCAT tubing. But it a little bit less flexible so order a bit long to allow for that. Worth it over the lesser quality tubing.
It was just as described and works great for my carb heat on my Hummel H5
High quality ducting
The tubing itself is great but was cut about 1/2â shorter than what I ordered. When I called customer service, the gladly sent me another....it was cut short too. My advice is if you need the full length, order an extra foot for insurance.
This is high quality ducting hose!! Its not cheap, but it appears to be worth the extra money. It is still flexible enough, but a little stiffer than SCAT. I recommend it.
received the items, they were as I wanted.
Quality product. Very satisfied.
this product is NOT quality.....buy the other SCEET-5. mine failed at altitude in the Lancair and caused major headaches. light rubbing rubs off to show spring material. JUNK.
The weight of this ducting is approximately 0.33 lbs / ft.
The material does not come with material analysis certification. You can request this information at the time of order. We receive this material with a certificate of conformance, the material analysis will need to be requested from the manufacturer, and they may charge for this accordingly.
The technical data sheet does not list the OD of this material, but it is approx. 1-1/8".