|Silicone 3/32" x 3" x 9ft|
|Silicone 3/32" x 36" (Sold by the foot)|
|Silicone 3/32" x 3" (Sold by the foot)|
|Silicone 1/8" x 2" x 9ft|
|Silicone 1/8" x 3" x 9ft|
|Silicone 1/8" x 4" x 9ft|
|Silicone Sheet 1/8 x 36" (Sold by the foot)|
|Silicone 1/8" x 2" (Sold by the foot)|
|Silicone 1/8" x 3" (Sold by the foot)|
|1/8" x 4" (Sold by the foot)|
|Silicone 1/8" x 3" x 9ft Furnished with fiberglass insert|
|Silicone 1/8" x 3" Furninshed with fiberglass insert (Sold by the foot)|
|SIlicone 1/8" x 36" Furnished with fiberglass instert (Sold by the foot)|
|This silicone rubber is excellent for replacement of baffle seals as it exceeds asbestos type seals in durability and flexibility over its entire operating heat range of -80 F to +425 F. Meets Mil Spec ZZR765B. ISR3 meets Mil Spec AMS3320 (PN 05-00770, 05-00771-3, 05-00771) AMS3303 for all other. Available in red, blue & black.|
Top of the market
Excellent product to replace worn or damaged baffle. The product is of high quality very flexible and easy to cut to the exact required size
Great product and great delivery. I would recommend this to anyone that needs baffling replaced.
Great for cutting out those odd shaped baffles.
I am familiar with this product and have used it previously. I am purchasing more based on my success with it in the past. ACS is the leader in supplies for EAB builders. Thanks
Excellent product for many uses. I bought this to make a gasket for an antique engine.
Nice material, easy to work with. Great replacement for the 25 year old seal in my RV6A. My one complaint: The 9 foot roll was about 1 foot less than needed to do the complete job. I had to order a second roll to finish the job a week later. Be sure to have high temperature RTV to seal up the gaps between the Baffle Seal and the AL engine baffles.
I think itâ€™s helping, to early to tell.
Get the one with fiberglass in it . Much better to prevent any ripping.
The fiberglass insert is impregnated between two layers of silicone, and is much more durable than just the silicone alone. We have added links to the other colors in the "Alternate Items" tab of this web page. We will be updating the photos for each color today so they will be more distinguishable from the thumbnail image.
This silicone baffle material is commonly riveted in place, and a silicone sealant is used to seal any overlapped material. We offer a silicone molding adhesive, part number 05-04555, but it does not have any info regarding oil. It is normally used for door molding or anti-chafe silicone material.
No, this was a typo on our web page. We have corrected. Thank you for bringing to our attention.