Excellent quality

Brian G Verified Purchase

WIRE GRIP 10-32 CONTROL END BLUE

I never saw one of these until I was replacing my throttle cable. At first, I was skeptical to the holding strength... they are precision made, the bowden cable fits snug before tightening.. grips hard.....make sure all parts are clean before assembling..

Jim S Verified Purchase

WIRE GRIP FOR .078 DIA-RED

Overpriced

Rodney B Verified Purchase

WIRE GRIP SHAFT + CAP .040 to .050 OD

Im loving this product so far. My only concern is longevity and dependability. If I designed this I would have added a lock-nut behind the wire-catch.

Ellery S Verified Purchase

WIRE GRIP FOR .078 DIA-RED

love it

Craig W Verified Purchase

WIRE GRIP FOR .078 DIA-RED

Needed to connect a wire pull cable to a clevis ..this device is the ideal solution ...works great

Walt M Verified Purchase

WIRE GRIP SHAFT + CAP .040 to .050 OD

Clever solution for connecting Bowden cable to threaded terminal. Well made. I pull tested after assembling wire grip to cable and it withstood a 100 pound pull with no sign of slippage.

Thomas W Verified Purchase

WIRE GRIP FOR .078 DIA-RED

Bag was labelled with PN ordered, but item was a size smaller. Does not fit .078 wire.

Christopher C Verified Purchase

WIRE GRIP FOR .078 DIA-RED

Yes, this really is an amazing piece of hardware! I have searched a year for this part. The 10-32 threads DO thread into Ball joint assy perfectly (aircraftspruce # 05-07500). These two parts seem to be made for each other. This is the highest quality solution to connect to the fuel injection contol levers, to control both throttle and mixture. Lycoming 200 hp, home built aircraft. Anything else will be second best.

The wire grip is as advertised. Basically a tiny mandrel with compression about the installed wire. I have not performed a tension test to failure, but the device appears to bind the cable quite tightly. Sufficient for most applications involve control cabling. It is noted that the wire grip is for solid wire only. Supposedly does not work well with multi-stranded cable wire. I beg to differ. Having installed on 7x19 twisted cable, it binds quite nicely, and has equal tension with the solid-core wire. Its also possible to solder tin the twisted cable ends, to basically achieve a solid wire (on the ends), If so desired, creating a multi-strand cable with solid wire ends.

Works great

These cable clamps are just the ticket. Ive seen so many planes with people trusting their lives to throttle/ mixture cables with a jam nut when they could have used these clamps.

Beautifully designed and executed. Small in diam, lightweight. The best on the market. Polished stainless. Flawless.

I installed a new fuel servo and the mixture cable end needed an alteration connecting to the servo. I tried a couple of different ways, but this wire grip fitted right over the cable end and made a very strong bond. Two things Aircraft Spruce should advertise with this item, however: - You need a perfect (99% straight cable end, otherwise it will not tighten over the cable strong enough) - You cant find a 10/32 female connection to this part at Aircraft Spruce so I needed to buy from McMaster Carr a ball joint end https://www.mcmaster.com/#60645k31/=1e6jgrz (Hint, Hint...) Otherwise it works like a charm.

Amazing piece...... make the job easy and looks good.... throttle cable in a tight place....tnx...jw

I measured the wire diameter as .063 and therefore ordered the largest size, as the middle size capability ended at .062. However, the largest size could not grip the cable at all, the threaded cone ran to the end of the thread. So I incurred another shipping and handling fee and another week of aircraft downtime, plus returning the wrong-size part

Not what I needed, difficult description on line

Gerald A Verified Purchase

WIRE GRIP FOR .078 DIA-RED

Mandrel failed. Cable released. Would not recommend.