Emitter Type: CREE
Weight: 0.32 oz (9 g)
Turn on first: Constant lighting / Turn on second time <3s: Fast Strobe. Switch between modes in fog/cloud etc.
WARNING: The product may contain and/or expose you to a chemical(s) or substance(s) which are known to the State of California to cause cancer and/or birth defects or other reproductive harm. www.P65Warnings.ca.gov
NAVSTROBE BEACON LIGHT W/CONSTANT & FAST WHITE STROBE 30W
Please note, Aircraft Spruce's personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon or implemented in lieu of consulting an A&P or other qualified technician. Aircraft Spruce assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.
Ohms law does not apply to LED technology. The industry standard is to compare light output intensity. For example a 24 watt tungsten bulb for sure draws ~ 2 amps at 12vdc and puts out about 600 lumens of light. A "24w" LED bulb will draw ~ 300ma and still put out 600 lumens.
Per the manufacturer: The Navstrobe beacon (11-13522) has a 300ms flash rate(this will change to 100ms after May 1st 2015).
The Navstrobe beacon (11-13522) is a replacement for the tailfin bulb. No, it is not TSO'd and only recommended for experimental aircraft.
3 Flashes per second.
No, this cannot be set to only strobe.